Wheel Well Bare Metal
#1
Honda-Tech Member
Thread Starter
Join Date: May 2007
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Wheel Well Bare Metal
For some reason the paint from the lip of my wheel well (rear) the paint peeled off and some is bare metal, I was wondering what paint you recommend to spray on it to prevent any rust from forming?
Doesnt have to look nice, you cant see it unless you look behind it. Just regular black aerosol?
https://i.imgur.com/IARfX3K.jpg
https://i.imgur.com/zK3Kt42.jpg
Doesnt have to look nice, you cant see it unless you look behind it. Just regular black aerosol?
https://i.imgur.com/IARfX3K.jpg
https://i.imgur.com/zK3Kt42.jpg
#2
On vacation
Join Date: Feb 2009
Location: Mcnoobsville
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wheel Well Bare Metal
Per your pictures, rust has already formed.
You are going to need to grind or cut any rust off and completely remove it if you don't want it to continue.
Then you can seal it with a primer and paint.
You are going to need to grind or cut any rust off and completely remove it if you don't want it to continue.
Then you can seal it with a primer and paint.
#3
Seagull Management
Join Date: Jun 2008
Location: Miramichi, NB, Canada
Posts: 15,150
Likes: 0
Received 24 Likes
on
22 Posts
Re: Wheel Well Bare Metal
put masking tape around the outside edge of the wheel well, sandblast the affected area, then spray it with epoxy primer (make sure you spray it with a gun, the stuff in an aerosol can wont work, it doesn't have a proper hardener in it. Then paint over it with whatever you want.
Thread
Thread Starter
Forum
Replies
Last Post