Shaving an engine bay
#1
Honda-Tech Member
Thread Starter
Shaving an engine bay
Howdy,
I have an EG in my garage and I have welded up nearly every engine bay hole and ground them down with a die grinder.
question on body filler..
Can I get away with using one or two types of fillers?
Thinking of going with Rage body filler as the main filler then stop.
Or
Go with the rage or bondo with fiberglass strands then rage normal filler.
There will be some somewhat high build areas for some of the seams possibly over an 8th inch.
--Aaron
I have an EG in my garage and I have welded up nearly every engine bay hole and ground them down with a die grinder.
question on body filler..
Can I get away with using one or two types of fillers?
Thinking of going with Rage body filler as the main filler then stop.
Or
Go with the rage or bondo with fiberglass strands then rage normal filler.
There will be some somewhat high build areas for some of the seams possibly over an 8th inch.
--Aaron
Thread
Thread Starter
Forum
Replies
Last Post