Paintless dent removal / dent wizard - Is this the way to go for dings?
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: ATL to SAV to ORL, USA
Posts: 7,506
Likes: 0
Received 0 Likes
on
0 Posts
Paintless dent removal / dent wizard - Is this the way to go for dings?
I've been talking with a local guy who has been removing dents the paintless way for 7 years. He has 1 vouche on the local forum and also claims to do really good work. He e-mailed me some pics of his work but can't really see much looking at resized pics. Anyhow, the guy cuts a deal for those on the local forum 10-15 dents about $150.
The guy said he does NOT drill any holes and should be pretty easy since my car is apart / no panels to remove.
Will the dents ever come back? Is this a safe way to remove little dings and dents.
Thanks for any input!!
PS <> I wanted to get some info on this. The guy should be coming out to look at the car this week.
The guy said he does NOT drill any holes and should be pretty easy since my car is apart / no panels to remove.
Will the dents ever come back? Is this a safe way to remove little dings and dents.
Thanks for any input!!
PS <> I wanted to get some info on this. The guy should be coming out to look at the car this week.
#2
Junior Member
Join Date: May 2003
Location: Sac City, Ca, US
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
I had a demonstration at my school where a PDR guy came around and showed us what he did. He did a pretty good job on a few dents but to the trained eye you can still see it. To an untrained eye it will be good as new.
#3
Junior Member
Join Date: Mar 2005
Location: Bowling Green, KY, U.S.
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Re: (vltnolia)
/\this guy tells the truth. To the trained eye, some dings can still be seen but only when you move up and down or side to side looking at where the old ding use to be. Some dings come out perfect. On my 98 Civic coupe, I had a guy who works at gary force honda here in bowling green to remove 10 dings and he charged 75 bucks. If you get on PDR forums, that is ridiculously cheap. Except for one just one ding that was on a body line you cant tell they were ever there, u another time I had a deep ding removed as well as a small wave behind it from a small garbage can falling on my car, and the ding came out pretty good but the wave is still there. In my experience and from chatting on PDR forums, its the small waves that are hard to get out. The larger/deep dings are much easier to get out. If the guy is good, $150 for 10-15 dings is SO worth it.
#4
Honda-Tech Member
iTrader: (1)
Join Date: Jun 2004
Posts: 7,889
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EJ8tunerman)
sorry for thread jacking but i was wondering if a pdr guy could take this out... had a little accident with a fence one late night.. ahah.. it doesnt have to be great cuz i'mma have the car painted again, but i just want it pulled out...
#5
Honda-Tech Member
Join Date: Jan 2005
Location: pa, usa
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Joon Joon)
PDR is hit or miss most of the time. With my expierences with PDR guys coming to the shop they make get rid of the dent leaving the whole area looking worse by making it really wavy. Now there are deffinetly some good guys out there who can really do a excellent job.
Also these guys will drill holes in your doors , etc to get the the area. Exposing bare metal (paintless my ***).
Also these guys will drill holes in your doors , etc to get the the area. Exposing bare metal (paintless my ***).
#6
Honda-Tech Member
Re: (mike9571)
theres a method involving dry ice or c02 in a can or w.e I've seen a video of it, and its pretty amazing. It pulls the dent right out with no paint damage or anything.
#7
Honda-Tech Member
Re: (hondaboy4life)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaboy4life »</TD></TR><TR><TD CLASS="quote">theres a method involving dry ice or c02 in a can or w.e I've seen a video of it, and its pretty amazing. It pulls the dent right out with no paint damage or anything.</TD></TR></TABLE>
ANYMORE INFO ON THIS METHOD....interested
ANYMORE INFO ON THIS METHOD....interested
Trending Topics
#9
Honda-Tech Member
Join Date: Jan 2005
Location: pa, usa
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
Re: (CivicSpoon)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CivicSpoon »</TD></TR><TR><TD CLASS="quote">Did a google search on dent repair and found this: http://www.metacafe.com/watch/...uster/</TD></TR></TABLE>
Save yourself the time and money on a simple dent like that. Just go from the inside and push it out.
Save yourself the time and money on a simple dent like that. Just go from the inside and push it out.
#10
Re: (mike9571)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike9571 »</TD></TR><TR><TD CLASS="quote">
Save yourself the time and money on a simple dent like that. Just go from the inside and push it out.</TD></TR></TABLE>
A lot of small dents won't push out that easy.
Save yourself the time and money on a simple dent like that. Just go from the inside and push it out.</TD></TR></TABLE>
A lot of small dents won't push out that easy.
#11
Junior Member
Join Date: Jul 2005
Location: pocono summit, pa, usa
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Re: (civic_speed99)
this is a video of the dry ice removal it almost makes me wanna dent my car to try it out
http://www.filecabi.net/video/20494805.html
http://www.filecabi.net/video/20494805.html
#15
Re: (Boosted Chemist)
On my integra, the PDR guy didn't have to drill any holes to access my doors. The only hole he had to widen was one near my rear bumper.
Anyways, if I were to ask someone to find where a dent used to be, and I give them a specific panel, I'd give them little chance of finding the dent within 10-15 seconds of close inspection. The lighting has to be just about perfect for them to see the leftover marks from the rubbing and hammering.
Of course this all depends on the experience level of your PDR guy... If anyone wants a good, cheap PDR guy in socal, pm me.
Anyways, if I were to ask someone to find where a dent used to be, and I give them a specific panel, I'd give them little chance of finding the dent within 10-15 seconds of close inspection. The lighting has to be just about perfect for them to see the leftover marks from the rubbing and hammering.
Of course this all depends on the experience level of your PDR guy... If anyone wants a good, cheap PDR guy in socal, pm me.
#16
Honda-Tech Member
#20
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2004
Location: Dark Side of the Moon
Posts: 8,760
Likes: 0
Received 0 Likes
on
0 Posts
Re: Paintless dent removal / dent wizard - Is this the way to go for dings? (harmonator)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator »</TD></TR><TR><TD CLASS="quote">I would not put dry ice on my paint...if dont wrong could chip.</TD></TR></TABLE>
Dude its frozen co2 gas, not a rock. Plus as it evaporates it builds a layer of gas between it and the surface, toss a little piece on the floor and watch it dance around. I havent tried this yet, ive been busy and its been shitty out
Dude its frozen co2 gas, not a rock. Plus as it evaporates it builds a layer of gas between it and the surface, toss a little piece on the floor and watch it dance around. I havent tried this yet, ive been busy and its been shitty out
#21
Honda-Tech Member
Join Date: Nov 2005
Location: My Garage
Posts: 3,394
Likes: 0
Received 0 Likes
on
0 Posts
Re: Paintless dent removal / dent wizard - Is this the way to go for dings? (Boosted Chemist)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist »</TD></TR><TR><TD CLASS="quote">Dude its frozen co2 gas, not a rock. Plus as it evaporates it builds a layer of gas between it and the surface, toss a little piece on the floor and watch it dance around. I havent tried this yet, ive been busy and its been shitty out </TD></TR></TABLE>
lol...I know. Its just something I wouldnt try. I work with liquid nitrogen EVERYDAY. Trust me that **** takes your paint off. Figured it would be the same.
lol...I know. Its just something I wouldnt try. I work with liquid nitrogen EVERYDAY. Trust me that **** takes your paint off. Figured it would be the same.
#22
Honda-Tech Member
Re: Paintless dent removal / dent wizard - Is this the way to go for dings? (harmonator)
anyone know their number? Need one in norcal to come fix my rearwheel well dent. Thanks.
#23
Honda-Tech Member
Join Date: Jul 2001
Location: Northeast, USA
Posts: 6,030
Likes: 0
Received 0 Likes
on
0 Posts
Re: Paintless dent removal / dent wizard - Is this the way to go for dings? (methos713)
Honda sheetmetal is paper thin.
If it's dinged or dented, the metal is stretched. To fix it "perfectly", the metal must be filled in with filler, or replaced.
PDR does make bad dings look much better, though. But never perfect.
If it's dinged or dented, the metal is stretched. To fix it "perfectly", the metal must be filled in with filler, or replaced.
PDR does make bad dings look much better, though. But never perfect.
Thread
Thread Starter
Forum
Replies
Last Post