JScott3d

I have a set of kyb agx's and the top ( where the adjust is ) has some paint no it. Is there anything that I can use to remove it without messing up the plastic selector ring because it has the different color settings?

JScott3d

anyone?

JScott3d

Someone must know.

accent0002

either sand it or wire wheel...or maybe u could tape off the part you want to keep paint on and use some kind of paint stripper

iBrandon

goo gone?

LSDC-4

lol at goo gone.

It's gonna be hard to just get the lil bit of overspray off. You can sand it but be very careful, you don't wanna sand any of the paint around it.

Be sides that your really gonna have to use some pain stripper IE. aircraft remover, then repaint that kyb the original color. That's probably what I would do.

snowmanG

This usually works for me get a rag and some carb cleaner spray some on the rag and use some elbow grease and it should come right off. Best way to remove over spray