joestreet

Hello,

I'm in the process of changing out the rear right wheel bearing on my 05 Pilot. (Using a HF version of the Hub Tamer)

I thought I could do this, watched tons of videos, read threads here and other sites, bought all the needed tools... and now I'm stuck.

I've gotten as far as getting the tire, caliper, disc, and spindle nut, and I'm at the point where the directions say to remove the ball joint but I'm stumped.

There is only a cotter pin and nut on the upper, and I have no idea what's going on with the lower.

Any help would be appreciated.