cclair

while driving yesterday my traction control light and then the malfunction light came on when I got home I shut the van off and started it again and the tcs light was off but when I revved the engine a little it came back on any ideas?

cclair

I've got views but no responses... Am I doing this right? I'm new

sytntyt

Need to get the codes scanned before any help ca. Be provided. Try a local advance auto or your dealer.

cclair

only one code came up P1259

sytntyt

Check your oil level.

cclair

i did it was a lill low but not much. i will check again

cclair

i brought the oil level up. disconected the battery to reset and when i started driving both lights came back on again

sytntyt

ok well if you have access and knowledge of how to use a mulitmeter you can test for continuity across the vtec switch. if you cant, you are probably looking at either being a vtec pressure switch or the valve itself. its located right above the oil filter. if you go the switch route, grab a vtec filter gasket also, not sure if a clogged one will cause this code or not. but for a few extra dollars it cant hurt to try.

cclair

i will try that next and update later. thanks

cclair

is this something that can be bought at a part store?

sytntyt

Multimeter? Or parts for the car? Any hardware store sells multimeterd or pepboys, advanced auto, Bennet etc.

cclair

the vtec pressure swithch

sytntyt

Honda dealer