WA: Complete D16 Turbo Kit
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
WA: Complete D16 Turbo Kit
Located in Puyallup Wa.
Willing to part out some, but most is fit for the kit.
Wastegate Spring is a 10 PSI spring which will work perfectly with a stock map sensor as well as a stock block.
That will get you ~240 WHP, which is within reliability limits of a stock D-series block. That's cool!
Full Spool by 2500RPM gives a supercharger like effect, makes good torque
Wastegate is merged with the downpipe in order to reduce audible noise.
Intercooler fits behind Stock bumper keeping that discreet look
Only 5000 Miles on the setup!
And I got 3rd at a local car show!
Fits 92-00 EG or EK
Can turn up the boost to reach 300HP+
Parts included:
Cast Central Wastegate Turbo Manifold
Turbo Smart 38mm Wastegate 10 PSI Spring
MAC Valves Electronic Boost Control Solenoid
Garret AiReasearch T3 60 Trim Turbo .60 Cold .48 Hot A/R 5000 Miles since new. Perfect condition
SpeedFactory Custom 3 in. Mandrel Stainless Steel Downpipe/Dumptube with V-Band clamp with both flanges TIG welded on to pipe
Go-Autoworks Intercooler
Go-Autoworks Aluminum Piping Couplers and Clamps
GReddy Type RS Blow-off Valve
ATP Turbo Blow-off Valve Recirculation Kit
Siemens Deka 880cc Injectors with all seals and Flow Test Results
Skunk2 Port Matched Intake Manifold
OmniPower 68mm Throttle Body New in box
-3AN Feed Line and Oil inlet flange
-10AN Drain line and Oil Return flange
Tapped Oil Pan
2 Bolt Compressor to 2.5 inch Billet flange with 3 inch intake and K&N filter
All the flanges on the turbo are still attached with the lines so you can just bolt it on and go.
Comes with fasteners
$2500
2533301614
Willing to part out some, but most is fit for the kit.
Wastegate Spring is a 10 PSI spring which will work perfectly with a stock map sensor as well as a stock block.
That will get you ~240 WHP, which is within reliability limits of a stock D-series block. That's cool!
Full Spool by 2500RPM gives a supercharger like effect, makes good torque
Wastegate is merged with the downpipe in order to reduce audible noise.
Intercooler fits behind Stock bumper keeping that discreet look
Only 5000 Miles on the setup!
And I got 3rd at a local car show!
Fits 92-00 EG or EK
Can turn up the boost to reach 300HP+
Parts included:
Cast Central Wastegate Turbo Manifold
Turbo Smart 38mm Wastegate 10 PSI Spring
MAC Valves Electronic Boost Control Solenoid
Garret AiReasearch T3 60 Trim Turbo .60 Cold .48 Hot A/R 5000 Miles since new. Perfect condition
SpeedFactory Custom 3 in. Mandrel Stainless Steel Downpipe/Dumptube with V-Band clamp with both flanges TIG welded on to pipe
Go-Autoworks Intercooler
Go-Autoworks Aluminum Piping Couplers and Clamps
GReddy Type RS Blow-off Valve
ATP Turbo Blow-off Valve Recirculation Kit
Siemens Deka 880cc Injectors with all seals and Flow Test Results
Skunk2 Port Matched Intake Manifold
OmniPower 68mm Throttle Body New in box
-3AN Feed Line and Oil inlet flange
-10AN Drain line and Oil Return flange
Tapped Oil Pan
2 Bolt Compressor to 2.5 inch Billet flange with 3 inch intake and K&N filter
All the flanges on the turbo are still attached with the lines so you can just bolt it on and go.
Comes with fasteners
$2500
2533301614
Thread
Thread Starter
Forum
Replies
Last Post
garados
Forced Induction
6
08-15-2007 08:46 PM
civic2nr9177
Forced Induction
15
04-11-2004 06:25 PM
t616
Forced Induction
13
06-26-2003 08:52 AM