B18B1 for sale!!! Pittsburgh, PA
#1
Junior Member
Thread Starter
Join Date: Jan 2004
Location: Pittsburgh, PA, USA
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
B18B1 for sale!!! Pittsburgh, PA
B18B1 Motor out of 95 Integra SE
Motor was redone and only has 3000 miles on it
block and crank cleaned and honed by DLK auto and
machine
polished head (by me w kit and die grinder)
ARP head studs
RaceEngineering block guard
micropolished and cleaned crank
brand new honda main bearings and rod bearings
had block cleand and honed to seat new Total Gapless
junk rings that never sealed.. motor ate alot of oil and
#3 finally went dead, never took it apart to see why..
$250.00 takes the cake, come and get it..
comes with engine harness dizzy and alternator, WILL NOT PART OUT
Please read the thread thouroughly before posting questions.
Motor WILL and DOES run but only on 3 cylinders
NO bottom end issuses/cranking banging
Rings never seated
#3 is dead
i poured oil in #3 to try to get it to build compression but for some reason it is bleeding out somewhere but not through rings.. may need head gasket maybe...
AIM SN is WhiteyTegSE if you have any questions post or IM me..
pics will be posted of the build AND where the motor sits now..
ATTN my web space is full! pix of motor where its sat are availabile upon request!! The pix posted here are only from the build!!
click link for pix
http://www.nauticom.net/www/barryjm/B18B1Build/
Motor was redone and only has 3000 miles on it
block and crank cleaned and honed by DLK auto and
machine
polished head (by me w kit and die grinder)
ARP head studs
RaceEngineering block guard
micropolished and cleaned crank
brand new honda main bearings and rod bearings
had block cleand and honed to seat new Total Gapless
junk rings that never sealed.. motor ate alot of oil and
#3 finally went dead, never took it apart to see why..
$250.00 takes the cake, come and get it..
comes with engine harness dizzy and alternator, WILL NOT PART OUT
Please read the thread thouroughly before posting questions.
Motor WILL and DOES run but only on 3 cylinders
NO bottom end issuses/cranking banging
Rings never seated
#3 is dead
i poured oil in #3 to try to get it to build compression but for some reason it is bleeding out somewhere but not through rings.. may need head gasket maybe...
AIM SN is WhiteyTegSE if you have any questions post or IM me..
pics will be posted of the build AND where the motor sits now..
ATTN my web space is full! pix of motor where its sat are availabile upon request!! The pix posted here are only from the build!!
click link for pix
http://www.nauticom.net/www/barryjm/B18B1Build/
Thread
Thread Starter
Forum
Replies
Last Post
ohsnapzafingcu
All Motor / Naturally Aspirated
13
04-10-2011 06:52 PM