Honda-Tech - Honda Forum Discussion

Notices

FS: Built PR3 head

Thread Tools
 
Search this Thread
 
Old 12-10-2014, 12:39 PM
  #1  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default FS: Built PR3 head
Selling my freshly built PR3 head with extras. 0 miles on it since the work was done. All work done by One6 with paperwork to prove it. Not in a rush to sell it, and I'll gladly keep it if I don't get what I want for it. NO LOW BALLERS. NO TRADES. $950 FIRM!!!

I have well over $800 into aftermarket parts and work alone, not including all the gaskets, the head itself, and other odds and ends.

I am willing to sell the head without certain parts and lower the price if someone would like to do that instead, but I won't sell off small parts until the head itself is gone.

What's included:

-Supertech dual valvesprings
-Supertech titanium retainers
-Supertech valve seals
-3 angle valve job
-Mating surface decked
-New OEM valve cover gaskets
-New OEM valve cover hardware and seals
-New OEM exhaust manifold gasket
-New OEM cam seals
-Skunk2 thermal intake manifold gasket
-OBD2 distributor with new internals
-Plug wires with 3k miles on them
-Valve cover











Last edited by NewCarScent; 01-23-2015 at 03:27 PM.
NewCarScent is offline  
Like
Old 12-11-2014, 02:38 PM
  #2  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Bump
NewCarScent is offline  
Like
Old 12-15-2014, 07:35 AM
  #3  
Honda-Tech Member
 
morganm58's Avatar
 
Join Date: Sep 2009
Location: Mi
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
bump for a good guy. I bought the block from this
morganm58 is offline  
Like
Old 12-15-2014, 08:46 PM
  #4  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Originally Posted by morganm58
bump for a good guy. I bought the block from this
Thank you!

Someone scoop this up for their winter build!
NewCarScent is offline  
Like
Old 12-20-2014, 01:46 PM
  #5  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Bump
NewCarScent is offline  
Like
Old 12-27-2014, 05:23 PM
  #6  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Bump! $750 FIRM without gaskets, valve cover, or distributor!
NewCarScent is offline  
Like
Old 12-29-2014, 12:59 PM
  #7  
Honda-Tech Member
 
SirDxEK's Avatar
 
Join Date: Feb 2009
Location: Sum Were in ILL
Posts: 631
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Bump wish tax time was here already lol, need this head for my Crx to get Lil more power out of it.... Glws
SirDxEK is offline  
Like

Trending Topics

Old 12-29-2014, 02:12 PM
  #8  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Originally Posted by SirDxEK
Bump wish tax time was here already lol, need this head for my Crx to get Lil more power out of it.... Glws
If you're seriously interested in it, we can work something out!
NewCarScent is offline  
Like
Old 12-30-2014, 01:24 AM
  #9  
Honda-Tech Member
iTrader: (2)
 
vroomvroomjdm24's Avatar
 
Join Date: Jul 2014
Location: wisconsin
Posts: 33
Received 1 Like on 1 Post
Default Re: FS: Built PR3 head
Do u have cam caps and the cam holders to go with the head?
vroomvroomjdm24 is offline  
Like
Old 12-30-2014, 03:07 AM
  #10  
Honda-Tech Member
 
andyvaj's Avatar
 
Join Date: Mar 2005
Location: oshkosh, WI, usa
Posts: 255
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
No camshafts? Is it all assembled back together? Thanks
andyvaj is offline  
Like
Old 12-30-2014, 04:11 AM
  #11  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Originally Posted by vroomvroomjdm24
Do u have cam caps and the cam holders to go with the head?
Yes I do, they just aren't pictured. Comes with new OEM hardware as well.

Originally Posted by andyvaj
No camshafts? Is it all assembled back together? Thanks
No cams or intake manifold included.
NewCarScent is offline  
Like
Old 12-30-2014, 09:27 PM
  #12  
Honda-Tech Member
 
B-SeriesMonster's Avatar
 
Join Date: Jun 2014
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Whats the best price you can do?
B-SeriesMonster is offline  
Like
Old 12-31-2014, 09:47 AM
  #13  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Originally Posted by B-SeriesMonster
Whats the best price you can do?
$750 is bottom dollar for the head without any extras
NewCarScent is offline  
Like
Old 12-31-2014, 07:00 PM
  #14  
Honda-Tech Member
 
B-SeriesMonster's Avatar
 
Join Date: Jun 2014
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
So you wanted 750, no VC, Dizzy, Gaskets?
B-SeriesMonster is offline  
Like
Old 01-01-2015, 02:50 PM
  #15  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Originally Posted by B-SeriesMonster
So you wanted 750, no VC, Dizzy, Gaskets?
Yeah, just head and cam caps
NewCarScent is offline  
Like
Old 01-03-2015, 03:15 PM
  #16  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Bump. A lot of dreamers showing interest, but that doesn't pay my bills!
Find this thing a new owner and I will personally give you $50!
NewCarScent is offline  
Like
Old 01-06-2015, 06:58 PM
  #17  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Bump n' Grind

NewCarScent is offline  
Like
Old 01-06-2015, 07:10 PM
  #18  
Trial User
 
Cristian-_'s Avatar
 
Join Date: Dec 2014
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Nice
Cristian-_ is offline  
Like
Old 01-10-2015, 02:45 PM
  #19  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
BUMP! PRICE DROP TO $950!
Moving soon and could use the cash!
NewCarScent is offline  
Like
Old 01-11-2015, 04:49 PM
  #20  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Pending sale of bare head. If buyer comes through with the money tomorrow, the valve cover, distributor, plug wires, and gaskets will be up for grabs.
NewCarScent is offline  
Like
Old 01-14-2015, 09:38 PM
  #21  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Potential buyer seems to be flaky. All messages replied to. Still up for grabs.
NewCarScent is offline  
Like
Old 01-17-2015, 05:12 AM
  #22  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Bump. Potential buyer backed out of deal. Everything is still up for grabs.
NewCarScent is offline  
Like
Old 01-20-2015, 02:37 PM
  #23  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Bump, all PMs replied to
NewCarScent is offline  
Like
Old 01-22-2015, 11:01 AM
  #24  
Honda-Tech Member
 
morganm58's Avatar
 
Join Date: Sep 2009
Location: Mi
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
are those itr LMAs?
morganm58 is offline  
Like
Old 01-22-2015, 04:48 PM
  #25  
Honda-Tech Member
Thread Starter
 
NewCarScent's Avatar
 
Join Date: Dec 2010
Location: Chicago, IL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Built PR3 head
Originally Posted by morganm58
are those itr LMAs?
Indeed they are.
Got a few interested parties, but I have yet to see anyone wave any cash at my face.
Someone come grab this!
NewCarScent is offline  
Like



Advanced Search
Quick Reply: FS: Built PR3 head


Reply Closed Thread Share

All times are GMT -8. The time now is 06:53 AM.