F/S: 1993 Honda Civic hatch drag car, 604WHP/385WTQ - $7,000 Cash FIRM or Trade+Cash
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Minneapolis, MN, USA
Posts: 2,221
Likes: 0
Received 0 Likes
on
0 Posts
F/S: 1993 Honda Civic hatch drag car, 604WHP/385WTQ - $7,000 Cash FIRM or Trade+Cash
I am selling my drag car. I am open to cash offers and trade + cash offers. Car is located in MN. I am willing to ship the chassis or whole car if a buyer needs, but you pay shipping ($600-1,200 depending on location).
***MAY CONSIDER PARTING OUT IF I GET ENOUGH INTERESTED BUYERS FOR PARTS***
__________________________________________________ ________
It is a 1993 Civic hatch with a built D16Z6 and turbo. New engine was built this year and made 604whp/385wtq. I have not had the car out this year with this setup. The old setup with 425whp ran 10.89 @ 128mph.
__________________________________________________ ________
Clean title in my name. I have had this car for 8 years.
__________________________________________________ ________
I will sell the whole car turn-key/race ready as-is right now with all parts listed below for $6,000 CASH FIRM or trade for an S2000, del Sol + cash your side, or open to just about any 1920's-1970's cars.
__________________________________________________ ________
DYNO VIDEO: http://vid50.photobucket.com/albums/...psf66df640.mp4
__________________________________________________ ________
***IF I CAN GET ENOUGH BUYERS FOR INDIVIDUAL PARTS, I WILL CONSIDER PARTING IT OUT. PRICES ARE LISTED. MOST PARTS ARE NEAR NEW/LOW USAGE.***
__________________________________________________ ________
Engine block:
Golden Eagle sleeved and o-ringed D16Z6 block 78mm (1.7L) - $1200
Arias 78mm custom spec pistons -- 10:1 with upgraded skirts and wrist pin - $650
Eagle H-beam rods - $350
ACL race bearings - $110
OEM head gasket - $55
OEM oil pump - $150
OEM timing belt - $45
OEM timing belt tensioner - $55
OEM water pump - $70
Subtotal: $2,685
Engine cylinder head:
D16Z6 ported with 5 angle valve job - $1,200
Bisimoto 3.6 billet camshaft - $480
Supertech oversized black nitride intake valves - $300
Supertech oversized Inconel exhaust valves - $400
Supertech valve springs, retainers, guides, and seals - $450
Unorthodox Racing 5 bolt adjustable cam gear - $110
Subtotal: $2,940
Assembly and misc. parts not listed - $750
Total: $6,375
***Will sell as listed above for $4,000.***
***Engine will not be parted out. Engine sells whole/complete as listed above. Bolt-on items are for sale separate and listed below.***
__________________________________________________ ________
Bolt-ons/Fuel/Turbo/Misc.:
Golden Eagle intake manifold - $500
Golden Eagle fuel rail - $100
Injector Dynamics 2000cc injectors - $800
Precision 6262 turbo - $800
RLD Fab ram horn manifold - $400
Full Blown Motorsports intercooler piping - $200
Full Blown Motorsports 70mm throttle body - $80
Full Blown Motorsports "Superman" catch can - $100
Full Blown Motorsports dual fuel pump setup with pumps - $450
Precision 600HP intercooler - $300
Full Blown Motorsports stainless turbo back exhaust -- straight pipe with a flex section at end of downpipe - $200
Turbosmart Race Port blow-off valve - $200
Tial 38mm wastegate with open dump tube - $180
4 Bar Omni MAP sensor - $80
Omni TPS - $20
OEM distributor - $120
OEM spark plug wires - $40
Competition Clutch twin disc - $800
Hondata S300 - $450
Hallman Pro manual boost controller - $60
Mishimoto dual core aluminum radiator with slim fan - $200
AEM wideband with AEM gauge - $125
Autometer oil pressure and boost gauges - $100
Proform shift light - $40
S&W Race Cars 8-point roll cage (bar) - $500 --> $Goes with shell
Grant GT steering wheel (made in Italy, not the cheap auto parts store one) - $100
Apexi turbo timer - $30 --> $Goes with shell
Skunk2 drag coilovers on new OE replacement shocks/struts - $350
JK Motorsports traction bar - $100
Innovative solid billet motor mounts - $200
FuelLab firewall mounted fuel pressure regulator and fuel filter - $200
Comp V2 wheels and M/T 24.5" slicks - $600
Blox lower control arms (rear only) - $110 --> $Goes with shell
Viper alarm with additional features -- info given to buyer only! - $600 --> $Goes with shell
__________________________________________________ ________
I will sell the shell for $2,000 best offer on stock suspension and steelies.
__________________________________________________ ________
***MAY CONSIDER PARTING OUT IF I GET ENOUGH INTERESTED BUYERS FOR PARTS***
__________________________________________________ ________
It is a 1993 Civic hatch with a built D16Z6 and turbo. New engine was built this year and made 604whp/385wtq. I have not had the car out this year with this setup. The old setup with 425whp ran 10.89 @ 128mph.
__________________________________________________ ________
Clean title in my name. I have had this car for 8 years.
__________________________________________________ ________
I will sell the whole car turn-key/race ready as-is right now with all parts listed below for $6,000 CASH FIRM or trade for an S2000, del Sol + cash your side, or open to just about any 1920's-1970's cars.
__________________________________________________ ________
DYNO VIDEO: http://vid50.photobucket.com/albums/...psf66df640.mp4
__________________________________________________ ________
***IF I CAN GET ENOUGH BUYERS FOR INDIVIDUAL PARTS, I WILL CONSIDER PARTING IT OUT. PRICES ARE LISTED. MOST PARTS ARE NEAR NEW/LOW USAGE.***
__________________________________________________ ________
Engine block:
Golden Eagle sleeved and o-ringed D16Z6 block 78mm (1.7L) - $1200
Arias 78mm custom spec pistons -- 10:1 with upgraded skirts and wrist pin - $650
Eagle H-beam rods - $350
ACL race bearings - $110
OEM head gasket - $55
OEM oil pump - $150
OEM timing belt - $45
OEM timing belt tensioner - $55
OEM water pump - $70
Subtotal: $2,685
Engine cylinder head:
D16Z6 ported with 5 angle valve job - $1,200
Bisimoto 3.6 billet camshaft - $480
Supertech oversized black nitride intake valves - $300
Supertech oversized Inconel exhaust valves - $400
Supertech valve springs, retainers, guides, and seals - $450
Unorthodox Racing 5 bolt adjustable cam gear - $110
Subtotal: $2,940
Assembly and misc. parts not listed - $750
Total: $6,375
***Will sell as listed above for $4,000.***
***Engine will not be parted out. Engine sells whole/complete as listed above. Bolt-on items are for sale separate and listed below.***
__________________________________________________ ________
Bolt-ons/Fuel/Turbo/Misc.:
Golden Eagle intake manifold - $500
Golden Eagle fuel rail - $100
Injector Dynamics 2000cc injectors - $800
Precision 6262 turbo - $800
RLD Fab ram horn manifold - $400
Full Blown Motorsports intercooler piping - $200
Full Blown Motorsports 70mm throttle body - $80
Full Blown Motorsports "Superman" catch can - $100
Full Blown Motorsports dual fuel pump setup with pumps - $450
Precision 600HP intercooler - $300
Full Blown Motorsports stainless turbo back exhaust -- straight pipe with a flex section at end of downpipe - $200
Turbosmart Race Port blow-off valve - $200
Tial 38mm wastegate with open dump tube - $180
4 Bar Omni MAP sensor - $80
Omni TPS - $20
OEM distributor - $120
OEM spark plug wires - $40
Competition Clutch twin disc - $800
Hondata S300 - $450
Hallman Pro manual boost controller - $60
Mishimoto dual core aluminum radiator with slim fan - $200
AEM wideband with AEM gauge - $125
Autometer oil pressure and boost gauges - $100
Proform shift light - $40
S&W Race Cars 8-point roll cage (bar) - $500 --> $Goes with shell
Grant GT steering wheel (made in Italy, not the cheap auto parts store one) - $100
Apexi turbo timer - $30 --> $Goes with shell
Skunk2 drag coilovers on new OE replacement shocks/struts - $350
JK Motorsports traction bar - $100
Innovative solid billet motor mounts - $200
FuelLab firewall mounted fuel pressure regulator and fuel filter - $200
Comp V2 wheels and M/T 24.5" slicks - $600
Blox lower control arms (rear only) - $110 --> $Goes with shell
Viper alarm with additional features -- info given to buyer only! - $600 --> $Goes with shell
__________________________________________________ ________
I will sell the shell for $2,000 best offer on stock suspension and steelies.
__________________________________________________ ________
Last edited by b18_ef_hatch; 01-07-2015 at 11:13 AM.
Trending Topics
#10
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Minneapolis, MN, USA
Posts: 2,221
Likes: 0
Received 0 Likes
on
0 Posts
#12
Honda-Tech Member
iTrader: (3)
Join Date: Dec 2007
Location: Springfield, MO, green
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: 1993 Honda Civic hatch drag car, 604WHP/385WTQ - $7,000 Cash FIRM or Trade+C
Bump, lots of money and quality parts invested in that! GLWS If you still have that catch can setup after tax money comes in you'll hear from me again!
#13
Re: F/S: 1993 Honda Civic hatch drag car, 604WHP/385WTQ - $7,000 Cash FIRM or Trade+C
Dayum... that is a good price! Too bad I need another car like I need chlamydia... uhhhhh.... I mean...
GLWS and I am already jealous of the buyer.
Oh yea, what fuel are you tuned for?
GLWS and I am already jealous of the buyer.
Oh yea, what fuel are you tuned for?
Thread
Thread Starter
Forum
Replies
Last Post
b18_ef_hatch
Vehicles for sale
17
01-13-2015 04:44 PM
b18_ef_hatch
Classifieds: Forced Induction
18
01-08-2015 10:52 AM
b18_ef_hatch
For Sale
9
01-07-2015 11:58 AM