When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
alright.. thanks.. haha i should have pics up next week.. but i got my head off lastnight. damn bro.. i had calcium build up on the outter piston sleeves and all over the head gasket.. thats from the dumbass previous owner putting hose water in it haha.. there was oil all over the pistons. and the pistons shake like all hell.. all lose..
Jack your car up and grab that wheel and see if it jiggles. Im not an expert on the bushings, But there is a bunch of bushings up front. Try the wheel jiggling.
i had one more question. my front passenger side.. that whole wheel bull shit is pushed back a little and it pulls to the right hardcore.. what bushing or ball joint would that be?? i would have pictures but im outta town right now..
just take and rebuild the block. Hone the sleeves, get new rings, new bearings, arp bolts for head and rods, shotpeened the rods. Knife edge the crank and micropolish it. Then get a valve job and a ebay turbo kit. Boost it. Nice injectors and a tune.
hey man i need help. i have a b18a1 obd1 i wanna get it built up for turbo so i can jsut drop it in my car. so something basically good yet not expensive. just so i can get my car running and drop the turbo n in a month or so.. and run like 9-12 pounds.. your help would be awesome.. to bad u dont live n phoenix haha.. even more help