98dxkoupe

iTrader: (1)

I'm having an issue with my passenger side parking light although the blinker does work but no parking light. Could this issue be a fuse or a short in a wire somewhere anyone else have this issue before? Thanks

98dxkoupe

iTrader: (1)

Anyone?

LowTEC SaiMike

iTrader: (7)

This is happening to the 1157 that is on the turn signal correct ?

98dxkoupe

iTrader: (1)

Yes the parking light and turn signal i believe is same bulb my turn signal works but no parking light on passenger side.

98dxkoupe

iTrader: (1)

Any help?

LowTEC SaiMike

iTrader: (7)

the 1157 is a dual filimant bulb . is both filimants not broken . Also , i think there is an 194 bulb as well . check both and see if the bulbs are broken

98dxkoupe

iTrader: (1)

Bulbs are not broken first thing i replaced was the bulbs and still no passenger parking light i checked fuses and there good not sure whats going on

98dxkoupe

iTrader: (1)

Anyone have a similar issue? Its driving me nuts!

skillzx201

you should check to see if the bulb holder is corroded.

98dxkoupe

iTrader: (1)

I tried replacing the socket and still does the thing. Any help would be appreciated.

98dxkoupe

iTrader: (1)

Bump still need help driving me insane having one parking light on! Replaced socket and still no parking light could there be a short somewhere?

Hawaiianhonda

For some dumb reason I'm having the same issue, passenger side running light doesn't work, I have a JDM front end thou but my headlights work but the fog and city light don't work

98dxkoupe

iTrader: (1)

Its literally driving me crazy gonna see if i can trace the wires out

98dxkoupe

iTrader: (1)

Bump anyone have this problem? Socket that i replaced was burned not sure if that means theres a short or a blown fuse?

98dxkoupe

iTrader: (1)

Bump still can't figure this out passenger turn signal works but no parking light!!!

rollinmyda

iTrader: (19)

I'm having the exact same issue on my civic. I have swapped bulb, socket, and probed the wire with a DMM. In my case I'm not getting voltage out of the fuse box on that wire so replacing the fuse box is my next step. Have you tried tracing the wire back through the harness and checking for continuity and voltage at each connection?