HondAl18

k20 u feel the hard pull
think about it k20a2= 200hp and k24a2=200hp
which is more agressive feel?

memo_ksa

K24A1 VS K20 type R ( FN2 )
1
2
3 K24A1 in dyno

juconkey

But why would anyone put a k20 head on a k24a2??

Attarixep

K20 cams have a larger VTEC lobe, also have the 50 degree VTC gear. So someone wanting to get a longer stroke and gain more torque but be able to have the higher lift on a "stock" block/head will gain from it. The deck height is also quite significant and valve-piston clearance on the K24a2 is tighter and can be risky at 50 degrees.

juconkey

Yeah and that gives you higher compression which equals more horse power. And if you want more lift put the cams in it. The compression you lose will hurt more then the little bit of lift you gain. That's why it don't make any since.

Sccacivic1997

iTrader: (2)

K20 because I don't wanna run in In stu with a k24

jmaesamh2b

What about the JDM k18c?