K series axles
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Jan 2005
Location: Salinas, CA, USA
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
K series axles
Ok so i slapped on my k24 with a 05 type S tranny on my teggy and i had bought the K Swap budget axles from HR and the pass. side axle is like 1.5 in longer and the driver side doesnt go in all the way
Is there any stock axles like from an EP3 or RSX that i can test fit or do they have to be like Hasport k swap axles??
Is there any stock axles like from an EP3 or RSX that i can test fit or do they have to be like Hasport k swap axles??
#3
Honda-Tech Member
Join Date: Aug 2008
Location: Baton Rouge, LA, USA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: K series axles
The budget axles are for EG/DC swaps. The EP3 axles are going to be the exact same length.
What is the overall measurement of the axle once it has been compressed?
What is the overall measurement of the axle once it has been compressed?
#4
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Jan 2005
Location: Salinas, CA, USA
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Re: K series axles
Ok i got the driver side in there and it fits perfect, but for the pass. side i talked to Hybrid-Racing and they said i needed a K20A2 Intermediate Shaft for it to work... Will it bolt on to my K24A2 block if i get one??
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2008
Location: Baton Rouge, LA, USA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: K series axles
Unless you want to run custom length axles, there is no point in running the K24 half shaft.
It's possible that it would fit, however not really relevant as the swap axles don't work with them.
It's possible that it would fit, however not really relevant as the swap axles don't work with them.
#9
Honda-Tech Member
Join Date: Jun 2009
Location: where it rains tacoma WA
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Re: K series axles
soooooo a k20a2 halfshaft on a k20a3 with ep3 axles in a teggy will work? My axles are short i need help thanks.
Last edited by BUILTLS/V; 09-03-2009 at 04:34 PM. Reason: oops
#11
Honda-Tech Member
Join Date: Aug 2008
Location: Baton Rouge, LA, USA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: K series axles
Half shaft Part numbers...
Acura:
44500-SCV-A00 is the Acura Pt# for the 02-06 RSX K20A2 & K20A3
44500-SDA-A00 is the Acura Pt# for the 04-08 TSX K24A2
Honda:
44500-SCV-A00 02-05 Civic Si EP3 K20A3
44500-SDA-A00 03-06 Honda Accord K24A4
44500-SCV-A10 02-05 Honda CRV K24A1
Hopefully this clear things up. Any 2.0l half shaft will work with either motor to get idea axle length.
What mounts and axles do you have BUILTLS/V?
Acura:
44500-SCV-A00 is the Acura Pt# for the 02-06 RSX K20A2 & K20A3
44500-SDA-A00 is the Acura Pt# for the 04-08 TSX K24A2
Honda:
44500-SCV-A00 02-05 Civic Si EP3 K20A3
44500-SDA-A00 03-06 Honda Accord K24A4
44500-SCV-A10 02-05 Honda CRV K24A1
Hopefully this clear things up. Any 2.0l half shaft will work with either motor to get idea axle length.
What mounts and axles do you have BUILTLS/V?
#12
Honda-Tech Member
Join Date: Jun 2009
Location: where it rains tacoma WA
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Re: K series axles
ep3 axles with hasport mounts.. so ur sayin it won't? is the half shaft longer?, so when u put on the pass. axle will fit all the way?
Last edited by BUILTLS/V; 09-04-2009 at 07:51 PM.
#14
Honda-Tech Member
Join Date: Aug 2008
Location: Baton Rouge, LA, USA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: K series axles
Hasport mounts in an EG with EP3 axles must use the K20A/K20A2/K20A3 half shaft.
If your axles aren't fitting, you've got the wrong ones.
If your axles aren't fitting, you've got the wrong ones.
Thread
Thread Starter
Forum
Replies
Last Post