CRZ OFFSETS
#26
Honda-Tech Member
Join Date: Mar 2006
Location: B.Land
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: CRZ OFFSETS
To answer the original question the stock wheels are +45 offset, in either a 6" wide standard or 6.5" wide optional oem wheel. The front wheels are flush at about 15-20mm lower offset than stock, and the rears at 30-35mm. If you want a flush look in back and no poke in front youll have to run spacers in the rear or a staggered setup, since the rears are much more sunk in.
Also if you lower the car on anything wider than stock wheels, you will probably need to run slightly stretched tires, negative camber and/or roll and shave the inside of the fenders. This car is not friendly for aggressive fitments, but it can be done.
Also if you lower the car on anything wider than stock wheels, you will probably need to run slightly stretched tires, negative camber and/or roll and shave the inside of the fenders. This car is not friendly for aggressive fitments, but it can be done.
#27
Re: CRZ OFFSETS
Damn I wish I can do that to my 13 CR-Z ,. I just would not know how to..I would have to take it to someone who does...lol..will check around, I have the same white one..you guys did a fantastic job on your cars, thanks for sharing.
Thread
Thread Starter
Forum
Replies
Last Post
mynameizstitch
Wheel and Tire
5
06-04-2012 04:04 PM