wiring with a B20b swap into a 98 civic ex 2dr
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2011
Location: washington
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
wiring with a B20b swap into a 98 civic ex 2dr
im getting ready to start buying everything for this swap still waiting for a few more dollars, but i know i need
b16 motor mounts
ls tranny with mount
b series shift linkage
b series axles
ls or b16 ecu??
im confused about the engine harness????
what kind of harness would i need? ive been reading around and getting mixed answers
this is what ill be getting
http://zerolift.com/products/honda/b...-intake-engine
b16 motor mounts
ls tranny with mount
b series shift linkage
b series axles
ls or b16 ecu??
im confused about the engine harness????
what kind of harness would i need? ive been reading around and getting mixed answers
this is what ill be getting
http://zerolift.com/products/honda/b...-intake-engine
#2
Honda-Tech Member
Join Date: Jul 2003
Location: Vancouver, WA, US
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
Re: wiring with a B20b swap into a 98 civic ex 2dr
99-00 si timing belt block mount, the ls tranny will work, use stock ek top tranny mount, rear 99-00 si T-mount, and an ls ecu. You will use your stock engine harness minus the vtec plugs and the knock sensor plug will no longer be used.
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2011
Location: washington
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Re: wiring with a B20b swap into a 98 civic ex 2dr
so my d16 tranny mount will work on the Ls? as well as my d16 harness? with A/C i would just need to get new lines right, and i read that the power steering pump is compatable with the b20 that true
thanks for not being a dick to me about "not researching"
cant wait to get this going.
thanks for not being a dick to me about "not researching"
cant wait to get this going.
Thread
Thread Starter
Forum
Replies
Last Post