S2000 Cluster Swap Wiring Guide
#126
Honda-Tech Member
Join Date: Oct 2009
Location: Griffin Ga
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
Re: S2000 Cluster Swap Wiring Guide
what did you use to calibrate the speed (gps, mile marker and stop watch)
when you change tire size, the calibration is off. tire sizes can distort up to 18%. this means your number can go from p4000 up to p4750.
#127
Honda-Tech Member
Re: S2000 Cluster Swap Wiring Guide
Honestly i stumbled across the frequency via a hondatech archive post, i never saved it but i copied down all the info on my iphone. I keep cross refering the mph on my cluster against my s300 cause it reads vehichle speed, its right on the money, even when i switched my tranny from type R to Ls.
#128
Honda-Tech Member
Join Date: Oct 2009
Location: Griffin Ga
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
Re: S2000 Cluster Swap Wiring Guide
Honestly i stumbled across the frequency via a hondatech archive post, i never saved it but i copied down all the info on my iphone. I keep cross refering the mph on my cluster against my s300 cause it reads vehichle speed, its right on the money, even when i switched my tranny from type R to Ls.
just as there is a difference in rotations per mile in 16 and 15 in wheels.
sorry, but you need an accurate speed detection device to get your speed proper.
these numbers are just base numbers, every ones number with be diifferent.
#132
Honda-Tech Member
#133
Re: S2000 Cluster Swap Wiring Guide
great info! its really helping me as i do my cluster wiring although i found a few things that i thought i should point out in case anyone else is doing it
i'm doing the cluster on my 95 gsr so it applies tio the 94 - 97 dc2
Connector A
Pin 9 is supposed to be red/yellow not red/white
For the wires on Connectors A-D from the s2k pig tails that are not listed, do they not need to be conencted to anything?
As well as wires from Connectors on the integra pig tails including the 3 wires from the 3rd connector which i believe is for the srs since you didn't list it?
Input from anyone is appreciated
Thanks
i'm doing the cluster on my 95 gsr so it applies tio the 94 - 97 dc2
Connector A
Pin 9 is supposed to be red/yellow not red/white
For the wires on Connectors A-D from the s2k pig tails that are not listed, do they not need to be conencted to anything?
As well as wires from Connectors on the integra pig tails including the 3 wires from the 3rd connector which i believe is for the srs since you didn't list it?
Input from anyone is appreciated
Thanks
#134
Honda-Tech Member
iTrader: (4)
Re: S2000 Cluster Swap Wiring Guide
I have an s2000 ap1 cluster setup for sale with cf bezel ready for bolt in, looks oem. includes wiring harness, fully functioning and all. PM for info..
sorry for the weak angle, can get more pics...
-Joone N.
sorry for the weak angle, can get more pics...
-Joone N.
Last edited by DSRxCandyh2bEG; 03-08-2012 at 07:17 PM.
#135
Honda-Tech Member
Re: S2000 Cluster Swap Wiring Guide
So... a little update, i have installed my AP2 2006 Cluster, but i have some issues, the check lamps wont work :s E-Brake, Check Engine, Oil presure ect ect... I dont Know what is wrong, i have checked all the wires 2 times, but i think i will check it again.
How can i program the Speedohealer, becouse i don't understand it correctly, i have installed it, i drive 32Km and the gauge says its 0.9Km Trip so i dont know, please help.
How can i program the Speedohealer, becouse i don't understand it correctly, i have installed it, i drive 32Km and the gauge says its 0.9Km Trip so i dont know, please help.
#136
Honda-Tech Member
iTrader: (2)
Re: S2000 Cluster Swap Wiring Guide
Thought these might be useful to post here.
00-03 S2000 Cluster
Plugs A and B
Plugs C and D
04-05 S2000
Connector A
Connector B
92-95 Civic
EG Connectors
96-00 Civic
Connectors A and B
Connectors C and D
Connectors E and F
94-01 Integra
DC Connectors
00-03 S2000 Cluster
Plugs A and B
Plugs C and D
04-05 S2000
Connector A
Connector B
92-95 Civic
EG Connectors
96-00 Civic
Connectors A and B
Connectors C and D
Connectors E and F
94-01 Integra
DC Connectors
Last edited by siboosted; 03-09-2012 at 01:15 PM. Reason: Added Info
#137
Honda-Tech Member
Join Date: May 2004
Location: Navarre, Fl, USA
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Re: S2000 Cluster Swap Wiring Guide
Hey man this should all be debunked by now... MODIFRY doesnt sell the unit no more and wire worx is banging us in the head for 300 for a peice thats aroung 60 in parts... ]
Has anyone try the Arduino unit and programmign at home and reperesented their findings?/?
#138
Honda-Tech Member
Join Date: Oct 2006
Location: Wesley Chapel, fl, USA
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Re: S2000 Cluster Swap Wiring Guide
So i have read about this, just picked up an Ap1 cluster for my ek single cam. its a 98, just wondering I read about people not using the speedohealer and just wiring it up. Is this possible?
#139
Honda-Tech Member
Re: S2000 Cluster Swap Wiring Guide
I think it is inpossible, becouse, the Civic use VSS and the S2K's speedometer is a hallseneor and the signal is totaly different. The VSS signal must be converted because the Cluster wont't recognise it, only the tachometer will show right values.
#141
Honda-Tech Member
Re: S2000 Cluster Swap Wiring Guide
on my CRX ee8 i dont have the:
Guage Lights - Red -- Dash Lights Dim Out
Switched 12v Power - Black/Yellow -- 10. Ignition Key-Red/White
do i need to connect this 2 connections of s2000 cluster (Dash Lights Dim Out / Ignition Key) in other place ?
Guage Lights - Red -- Dash Lights Dim Out
Switched 12v Power - Black/Yellow -- 10. Ignition Key-Red/White
do i need to connect this 2 connections of s2000 cluster (Dash Lights Dim Out / Ignition Key) in other place ?
#143
Honda-Tech Member
Join Date: Aug 2001
Location: VA BEACH
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Re: S2000 Cluster Swap Wiring Guide
Sorry to bring this back up from the past....
-Are there any updates or new units to solve the VSS and water temp readouts?
-Also, I hear 2 things about the gas tank level still. Is this a straight "tap and play" or do I need to install something to read the correct level?
Thank you for your time....
-Are there any updates or new units to solve the VSS and water temp readouts?
-Also, I hear 2 things about the gas tank level still. Is this a straight "tap and play" or do I need to install something to read the correct level?
Thank you for your time....
#144
Re: (bigcalidave)
It doesn't need or have a constant? I've got the schematics from the same cluster your talking about, which is the same i have installed in my car and those pinouts and wires i mentioned above are the ones that run straight to constant power, so that's how i wired them. I believe you about the odometer being stored separately, i have no clue, but i know my schematic shows constant power to B5 and D16. Check it out and let me know if you have those wires listed on your or not and what you think they are for.
As for the VSS, i see where it splits now, So do you think tapping into an aftermarket digital speedometer to get a signal will work? I've got the electrical vss already to get the nordskog guage a signal.
also, the blu/wht wire i see coming from the vss to the cluster and ecm, but what is the yel/blu wire for? it comes from the ecm to the vss.
As for the VSS, i see where it splits now, So do you think tapping into an aftermarket digital speedometer to get a signal will work? I've got the electrical vss already to get the nordskog guage a signal.
also, the blu/wht wire i see coming from the vss to the cluster and ecm, but what is the yel/blu wire for? it comes from the ecm to the vss.
- Hi i am installing an s2000 cluster to my eg k series i am runing a k20z3 with magnetic speed sensor i am using kpro but i dont know how to wire the sensor to my speedo or to the ecu can you help me
Thread
Thread Starter
Forum
Replies
Last Post
ej1bmx
For Sale
39
05-08-2013 06:26 PM