BIG T

I am looking for info that will allow me to build a G23 i see there is some info, but i am looking for a definitive guide on how to make this work.

What exactly does it take?

What exactly is needed?

Is it really just as simple as an LSVTEC?

What are the things to consider?

Is it possible to complete for less than $800?

Is the extra work of a G23 really worth the extra 20 TQ over a stock F23A?

whitesihatch

its basically just a big lsvtec. Seen people use oem k20 pistons to up the compression.

BIG T

Is it worth the gain

Canadian_EF

The best part is that the f23 has iron cylinders. Two oil drain ports need to be plugged in the H series head. It gives you low compression unless you put different pistons in or deck the block

BIG T

which parts require plugging
what type of numbers can be seen from this setup ie: f23a stock block and h23 stock head

Ludesol

what to ports due u got to plug in H23 head and F23 block

Justin Burnette

and what all do I need to do the swap

spockle

This is one of the more well known builds. Just keep in mind that it's way more than a simple engine swap.

Chris Bolis' G23