EK GSR swap cel help
03-19-2012, 09:56 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2012
Location: Phoenix
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
EK GSR swap cel help
ok so i have a 96 ek sedan. Swap is a 96 gsr with obd2 ecu. I have all the
bugs worked out except with the EVAP system. AT 1st i had a code for
FTP sensor voltage for i followed ffs squad to trick the ecu in thinking I have a FTP sensor sense my vehicle does not have one. After i did the FTP trick
now im have cel code p1457 evap canister system leak.
IM using stock ek evap canister and gsr purge solenoid.
So do i need to use a integra gsr canister, or could it be that i just have
a bad purge valve?
Any help with this evap system would be great.
I will be switching to OBD1 but i still need to pass emission so i have to
be able to pass with a OBD2 ecu.
bugs worked out except with the EVAP system. AT 1st i had a code for
FTP sensor voltage for i followed ffs squad to trick the ecu in thinking I have a FTP sensor sense my vehicle does not have one. After i did the FTP trick
now im have cel code p1457 evap canister system leak.
IM using stock ek evap canister and gsr purge solenoid.
So do i need to use a integra gsr canister, or could it be that i just have
a bad purge valve?
Any help with this evap system would be great.
I will be switching to OBD1 but i still need to pass emission so i have to
be able to pass with a OBD2 ecu.
12-19-2012, 02:19 PM
#3
Honda-Tech Member
Join Date: Oct 2009
Location: Out in the cuts of hwy 1-60
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK GSR swap cel help
Yes any1 have same issue.
Po441 and Po171 came on. I'm using Ek purge . Do I have to us gsr?. Plus what about canister?
Po441 and Po171 came on. I'm using Ek purge . Do I have to us gsr?. Plus what about canister?
Thread
Thread Starter
Forum
Replies
Last Post
efgkkid
Honda Civic / Del Sol (1992 - 2000)
4
09-26-2012 04:43 PM
