BRAICH BUILT A/M H2B Build - Honda-Tech

Go Back   > >
Log In 


BRAICH BUILT A/M H2B Build

Closed Thread
 
 
 
LinkBack Thread Tools Search this Thread
Old 08-05-2008, 02:28 PM   #1
Honda-Tech Member
Thread Starter
 
JDM JEFFREY's Avatar
 
Join Date: Dec 2004
Location: CALI
Posts: 3,246
iTrader Rating: (1)
Default BRAICH BUILT A/M H2B Build

The old B20 vtec 232hp159tq



the new 89x95 h22




















just need my magnus motorsports intake manifold and then to the dyno..


Modified by JDM JEFFREY at 12:08 PM 8/6/2008

Last edited by JDM JEFFREY; 01-10-2010 at 07:34 PM.
JDM JEFFREY is offline  
Old 08-05-2008, 02:42 PM   #2
Honda-Tech Member
 
YeeJ6's Avatar
 
Join Date: Jun 2005
Location: Bay Area, Ca
Posts: 4,760
iTrader Rating: (0)
Default Re: my h2b build (JDM JEFFREY)

Sick sick sick!!!
YeeJ6 is offline  
Old 08-05-2008, 05:16 PM   #3
Honda-Tech Member
 
turboedsupe's Avatar
 
Join Date: Feb 2007
Location: glendale, az, usa
Posts: 370
iTrader Rating: (0)
Default Re: my h2b build (YeeJ6)

Coupe or hatch? Thats a sick setup man i want to see pics of the chasis also
turboedsupe is offline  
Old 08-05-2008, 06:23 PM   #4
Honda-Tech Member
Thread Starter
 
JDM JEFFREY's Avatar
 
Join Date: Dec 2004
Location: CALI
Posts: 3,246
iTrader Rating: (1)
Default Re: my h2b build (turboedsupe)

its a hatch
ill post pics in a bit
JDM JEFFREY is offline  
Old 08-05-2008, 06:44 PM   #5
King of the One Liners
 
2fastGSR's Avatar
 
Join Date: Apr 2001
Location: Jersey, USA
Posts: 6,486
iTrader Rating: (0)
Default Re: my h2b build (JDM JEFFREY)

Very nice . . .

Care to break down the setup?
2fastGSR is offline  
Old 08-05-2008, 07:08 PM   #6
Honda-Tech Member
Thread Starter
 
JDM JEFFREY's Avatar
 
Join Date: Dec 2004
Location: CALI
Posts: 3,246
iTrader Rating: (1)
Default Re: my h2b build (2fastGSR)




the set up is
h22 block
h23 crank
h22 pistons
egale rods
cc ported head
bloxs bs
magnus intake mani
ssr header..

the block is a loner block from PED..well mine gets built..
my block is a h22a4 ge sleeves
97 f23 crank 90 bore
12.5 comp
JDM JEFFREY is offline  
Old 08-05-2008, 07:10 PM   #7
Honda-Tech Member
Thread Starter
 
JDM JEFFREY's Avatar
 
Join Date: Dec 2004
Location: CALI
Posts: 3,246
iTrader Rating: (1)
Default Re: my h2b build (2fastGSR)

hows the re-build going bro?
JDM JEFFREY is offline  
Old 08-05-2008, 07:25 PM   #8
King of the One Liners
 
2fastGSR's Avatar
 
Join Date: Apr 2001
Location: Jersey, USA
Posts: 6,486
iTrader Rating: (0)
Default Re: my h2b build (JDM JEFFREY)

Sounds pretty killer man. PED puts out some rad builds.

Rebuild is going well. Bigger and badder is the name of the game . .

thanks for asking though
2fastGSR is offline  
Old 08-05-2008, 07:50 PM   #9
Honda-Tech Member
Thread Starter
 
JDM JEFFREY's Avatar
 
Join Date: Dec 2004
Location: CALI
Posts: 3,246
iTrader Rating: (1)
Default Re: my h2b build (2fastGSR)

thanks for the kind words
JDM JEFFREY is offline  
Old 08-06-2008, 01:16 PM   #10
Honda-Tech Member
 
dohcem1's Avatar
 
Join Date: Feb 2008
Location: CA, USA
Posts: 450
iTrader Rating: (0)
Default Re: my h2b build (JDM JEFFREY)

damn.......... lol thats all i can say. On your sig, you said you had a k20 running 12.0 at the track? Hope you can give us a compare/contrast when your h2b is done!
dohcem1 is offline  
Old 08-06-2008, 04:04 PM   #11
Honda-Tech Member
 
88ED8's Avatar
 
Join Date: Aug 2004
Location: SW. Florida
Posts: 4,831
iTrader Rating: (0)
Default Re: my h2b build (JDM JEFFREY)

nice, like the shaved vc letters
Any pics of the magnus intake mani???
88ED8 is offline  
Old 08-06-2008, 04:16 PM   #12
Honda-Tech Member
 
Linh.'s Avatar
 
Join Date: Mar 2004
Location: Florida
Posts: 3,234
iTrader Rating: (0)
Default Re: my h2b build (88ED8)

any pictures of frame rail to crank pulley clearance?
Linh. is offline  
Old 08-06-2008, 04:39 PM   #13
Honda-Tech Member
 
SIXTY's Avatar
 
Join Date: Oct 2005
Location: Diamond Bar, SOCAL
Posts: 3,987
iTrader Rating: (0)
Default Re: my h2b build (Linh.)

Is that a qsd plate? Whats that writing on the top?
SIXTY is offline  
Old 08-06-2008, 04:54 PM   #14
Honda-Tech Member
 
88ED8's Avatar
 
Join Date: Aug 2004
Location: SW. Florida
Posts: 4,831
iTrader Rating: (0)
Default Re: my h2b build (SIXTY)

It's the QSD logo and part number.
88ED8 is offline  
Old 08-06-2008, 05:33 PM   #15
Honda-Tech Member
 
Shadowz7429's Avatar
 
Join Date: Dec 2006
Location: UK
Posts: 2,361
iTrader Rating: (0)
Default

Wow! came outta nowhere with a sick build lol
Shadowz7429 is offline  
Old 08-06-2008, 07:22 PM   #16
Junior Member
 
Join Date: Jan 2006
Posts: 312
iTrader Rating: (0)
Default Re: (Shadowz7429)

wow!! Nice header man i got the same one just came in last week
93lxh22 is offline  
Old 08-06-2008, 07:44 PM   #17
Honda-Tech Member
 
SIXTY's Avatar
 
Join Date: Oct 2005
Location: Diamond Bar, SOCAL
Posts: 3,987
iTrader Rating: (0)
Default Re: my h2b build (88ED8)

Quote:
Originally Posted by 88ED8
It's the QSD logo and part number.
Mine doesnt have that
SIXTY is offline  
Old 08-06-2008, 07:55 PM   #18
Honda-Tech Member
 
88ED8's Avatar
 
Join Date: Aug 2004
Location: SW. Florida
Posts: 4,831
iTrader Rating: (0)
Default Re: my h2b build (SIXTY)

I guess only the "new" plates have it since there wasn't always a part number for the QSD plates..... They also have a EK instead of a CRX CNCed on them!

I want a new plate with a CRX on it !!!...
88ED8 is offline  
Old 08-06-2008, 08:28 PM   #19
Honda-Tech Member
Thread Starter
 
JDM JEFFREY's Avatar
 
Join Date: Dec 2004
Location: CALI
Posts: 3,246
iTrader Rating: (1)
Default Re: my h2b build (88ED8)

Quote:
Originally Posted by dohcem1
damn.......... lol thats all i can say. On your sig, you said you had a k20 running 12.0 at the track? Hope you can give us a compare/contrast when your h2b is done!
the k20 ek was my homies car..
the same motor in the ped car went 11.5
Quote:
Originally Posted by SIXTY
Is that a qsd plate? Whats that writing on the top?
ya its the new qsd kit
.
Quote:
Originally Posted by 88ED8
nice, like the shaved vc letters
Any pics of the magnus intake mani???
the mani will be there on friday

Last edited by JDM JEFFREY; 03-29-2010 at 11:36 PM.
JDM JEFFREY is offline  
Old 08-06-2008, 09:36 PM   #20
Honda-Tech Member
Thread Starter
 
JDM JEFFREY's Avatar
 
Join Date: Dec 2004
Location: CALI
Posts: 3,246
iTrader Rating: (1)
Default Re: my h2b build (JDM JEFFREY)

Quote:
Originally Posted by Linh.
any pictures of frame rail to crank pulley clearance?


the PED 6 point cage..





back side


Last edited by JDM JEFFREY; 12-30-2008 at 09:09 PM.
JDM JEFFREY is offline  
Old 08-06-2008, 09:55 PM   #21
Honda-Tech Member
 
88ED8's Avatar
 
Join Date: Aug 2004
Location: SW. Florida
Posts: 4,831
iTrader Rating: (0)
Default Re: my h2b build (JDM JEFFREY)

Nice seats!!

If I were you, I'd loop the heater lines together instead of useing those rubber caps with clamps, mine started to leak over time...
88ED8 is offline  
Old 08-06-2008, 09:58 PM   #22
Honda-Tech Member
Thread Starter
 
JDM JEFFREY's Avatar
 
Join Date: Dec 2004
Location: CALI
Posts: 3,246
iTrader Rating: (1)
Default Re: my h2b build (88ED8)

thanks. I'll have to do that..
JDM JEFFREY is offline  
Old 08-07-2008, 06:26 AM   #23
King of the One Liners
 
2fastGSR's Avatar
 
Join Date: Apr 2001
Location: Jersey, USA
Posts: 6,486
iTrader Rating: (0)
Default Re: my h2b build (JDM JEFFREY)

ahh thats just excessive weight. . . . I capped mine, just make sure they are the thick caps and you hose clamp them and you should be fine. . .

I bought an extra set and bring them to the track with me. I mean they are only 3 bucks haha

Weight savings FTW . . .

It really does sound like a killer build man. Now i know what it was like for everyone watching my thread, i am excited to see this thing rip ! haha
2fastGSR is offline  
Old 08-07-2008, 04:30 PM   #24
Honda-Tech Member
Thread Starter
 
JDM JEFFREY's Avatar
 
Join Date: Dec 2004
Location: CALI
Posts: 3,246
iTrader Rating: (1)
Default Re: my h2b build (2fastGSR)

thanks..
ya i have the thick caps..so ill try them out..
I cant wait for it to be done..I called magnus today to get my tracking number,and they said they sold my mani to someone else..so one more week..I hope..
JDM JEFFREY is offline  
Old 08-07-2008, 04:36 PM   #25
I'm really 2slow
 
2fast4u831's Avatar
 
Join Date: Jan 2004
Location: 2 cars, no garage, near Laguna Seca CA, USA
Posts: 8,941
iTrader Rating: (0)
Default Re: my h2b build (JDM JEFFREY)

looks great man!! keep us updated
2fast4u831 is offline  
 
 
Closed Thread

Related Topics
Thread Thread Starter Forum Replies Last Post
{Circuit Hero S2000} !LL W!LL Honda / Acura 51 11-04-2006 09:19 AM
BAJA 500 6/2/06 (56k go take a dump) !LL W!LL Honda / Acura 45 06-05-2006 08:58 AM
Hollys Turbo Mirage Stunna BEN Honda / Acura 85 04-26-2005 06:21 AM
Pics of Dut619's new car (non-Honda) (56k, don't do it) rodrez. Honda / Acura 267 04-15-2005 11:29 PM
You might like these... Stunna BEN Honda / Acura 120 03-10-2005 08:49 PM


Tags
91, b20, build, built, fully, h2b, integra, jdm, jeffery, numbers, pics, post, thread, ultimate, vs, vtec

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 10:03 PM.



Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.