b16 valve seats with Supertech springs
#1
Honda-Tech Member
Thread Starter
b16 valve seats with Supertech springs
Hi, I bought a spare b16 head and I was swapping the ITR cams and Supertech springs to my current head, When I noted this head isn't using the valve seats Honda part# 14775-pr3-000.
there's no problem with this or it's necessary to use them?
Thanks
there's no problem with this or it's necessary to use them?
Thanks
#2
Honda-Tech Member
Re: b16 valve seats with Supertech springs
You must have some type of seat to locate the inner and outer springs correctly... be it one provided by the spring manufacturer or a stock one. Also, without a seat, the spring rates will be LOWER than advertised and will allow a valve to float at an earlier peak RPM because of the taller install height.
Put in a set of spring seats... your engine will thank you.
Put in a set of spring seats... your engine will thank you.
Thread
Thread Starter
Forum
Replies
Last Post