[FAQ] ***H22A into Civic EG/EK INFORMATION Post all H22A Hybrid info here***
10-21-2003, 06:04 PM
#26
Honda-Tech Member
Join Date: Apr 2003
Location: CDA, ID
Posts: 8,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ] H22A into Civic EG/EK INFORMATION Post all H22A Hybrid info here (poison)
[/quote]
I wanna thank Jason KiDD and Newman for WAY back in the day
[/quote]thanks dick
10-21-2003, 11:12 PM
#27
Honda-Tech Member
Join Date: Sep 2002
Posts: 3,229
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ] H22A into Civic EG/EK INFORMATION Post all H22A Hybrid info here (Timmay)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Timmay »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
I wanna thank Jason KiDD and Newman for WAY back in the day[/quote]
thanks dick
[/QUOTE]
lol...
Timmay too damnit!
Great info btw
</TD></TR></TABLE>
I wanna thank Jason KiDD and Newman for WAY back in the day
[/quote]thanks dick
[/QUOTE]
lol...
Timmay too damnit!
Great info btw
10-22-2003, 06:15 AM
#28
Senior Member
Thread Starter
Re: [FAQ] H22A into Civic EG/EK INFORMATION Post all H22A Hybrid info here (Timmay)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Timmay »</TD></TR><TR><TD CLASS="quote">
thanks dick
</TD></TR></TABLE>
AND TIMMAY, both doing it at the same time. thanks yo
thanks dick
</TD></TR></TABLE>
AND TIMMAY, both doing it at the same time. thanks yo
10-22-2003, 02:10 PM
#29
Honda-Tech Member
Join Date: Apr 2003
Location: CDA, ID
Posts: 8,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ] H22A into Civic EG/EK INFORMATION Post all H22A Hybrid info here (poison)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poison »</TD></TR><TR><TD CLASS="quote">
AND TIMMAY, both doing it at the same time. thanks yo
</TD></TR></TABLE>
thats right beatch, who hooked you up.
AND TIMMAY, both doing it at the same time. thanks yo
</TD></TR></TABLE>thats right beatch, who hooked you up.
10-23-2003, 03:07 AM
#30
Join Date: Oct 2002
Location: usa
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
MY GHEY .02
J's racing intake won't fit if you use the factory mounting point for the wiring harness plugs on the strut tower...you have to relocate it below the intake and it is still a squeeze...
J's racing intake won't fit if you use the factory mounting point for the wiring harness plugs on the strut tower...you have to relocate it below the intake and it is still a squeeze...
10-23-2003, 04:11 PM
#31
Senior Member
Thread Starter
Re: (citrusdrop)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by citrusdrop »</TD></TR><TR><TD CLASS="quote">MY GHEY .02
J's racing intake won't fit if you use the factory mounting point for the wiring harness plugs on the strut tower...you have to relocate it below the intake and it is still a squeeze...</TD></TR></TABLE>
FYI, AEM ITR CAI, Prelude CAI does fit in EG's. I do know the ITR CAI fits in EK's, but am not 100% sure about the Prelude CAI.
As for expected 1/4 times, you can expect (with a decent 60 foot, elavation, etc coming into play), mainly 13-14 second range. But that varies to say the least.
J's racing intake won't fit if you use the factory mounting point for the wiring harness plugs on the strut tower...you have to relocate it below the intake and it is still a squeeze...</TD></TR></TABLE>
FYI, AEM ITR CAI, Prelude CAI does fit in EG's. I do know the ITR CAI fits in EK's, but am not 100% sure about the Prelude CAI.
As for expected 1/4 times, you can expect (with a decent 60 foot, elavation, etc coming into play), mainly 13-14 second range. But that varies to say the least.
10-28-2003, 11:46 AM
#33
Honda-Tech Member
Re: [FAQ] H22A into Civic EG/EK INFORMATION Post all H22A Hybrid info here (poison)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poison »</TD></TR><TR><TD CLASS="quote">Air Intake Bypass solenoid (secondary butterflies)
- Sensor voltage to the A25 pinout (or splice into the Yel/Blk wire connector at the driver shock tower harness.
- ECU Signal leading to A17 pinout on ECU</TD></TR></TABLE>
The sensor voltage is a BLK/YEL wire and the ECU signal is a PINK wire.
The colors are the same for JDM and USDM.
- Sensor voltage to the A25 pinout (or splice into the Yel/Blk wire connector at the driver shock tower harness.
- ECU Signal leading to A17 pinout on ECU</TD></TR></TABLE>
The sensor voltage is a BLK/YEL wire and the ECU signal is a PINK wire.
The colors are the same for JDM and USDM.
10-29-2003, 07:26 AM
#34
Senior Member
Thread Starter
Re: [FAQ] H22A into Civic EG/EK INFORMATION Post all H22A Hybrid info here (turbogixxer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbogixxer »</TD></TR><TR><TD CLASS="quote">
The sensor voltage is a BLK/YEL wire and the ECU signal is a PINK wire.
The colors are the same for JDM and USDM.</TD></TR></TABLE>
Yes, some manuals display Yel/Blk and Blk/Yel. The wire is a Yellow wire with a black stripe which comes from the A25 pinout to the power junction harness at the driver side shock tower harness.
Then there is a circuit cap which completes circuit to all other sensors that require the Yel/Blk wire going to it (such as IACV, fuel injectors, IAB, etc..)
The sensor voltage is a BLK/YEL wire and the ECU signal is a PINK wire.
The colors are the same for JDM and USDM.</TD></TR></TABLE>
Yes, some manuals display Yel/Blk and Blk/Yel. The wire is a Yellow wire with a black stripe which comes from the A25 pinout to the power junction harness at the driver side shock tower harness.
Then there is a circuit cap which completes circuit to all other sensors that require the Yel/Blk wire going to it (such as IACV, fuel injectors, IAB, etc..)
10-29-2003, 07:34 AM
#35
Honda-Tech Member
Re: [FAQ] H22A into Civic EG/EK INFORMATION Post all H22A Hybrid info here (poison)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poison »</TD></TR><TR><TD CLASS="quote">
Yes, some manuals display Yel/Blk and Blk/Yel. The wire is a Yellow wire with a black stripe which comes from the A25 pinout to the power junction harness at the driver side shock tower harness.
Then there is a circuit cap which completes circuit to all other sensors that require the Yel/Blk wire going to it (such as IACV, fuel injectors, IAB, etc..)</TD></TR></TABLE>
Yeah, after looking at the diagrams, generally blk/yel and yel/blk are sensor voltage.
Yes, some manuals display Yel/Blk and Blk/Yel. The wire is a Yellow wire with a black stripe which comes from the A25 pinout to the power junction harness at the driver side shock tower harness.
Then there is a circuit cap which completes circuit to all other sensors that require the Yel/Blk wire going to it (such as IACV, fuel injectors, IAB, etc..)</TD></TR></TABLE>
Yeah, after looking at the diagrams, generally blk/yel and yel/blk are sensor voltage.
10-29-2003, 11:09 AM
#36
Senior Member
Thread Starter
Re: [FAQ] H22A into Civic EG/EK INFORMATION Post all H22A Hybrid info here (turbogixxer)
Another thing to point out.
The current HPI (??) Hot Compacts & Import magazine actually has a very good and thorough walk-thru on doing an H22A swap into a DC2 GS-R.
Brian G from HASport I believe did the swap and did a fine job on taking pictures with the review.
HOWEVER...
While reviewing the whole article, I have noticed just little flaws in there...
the engine harness check list (which I have listed in the first post) has very little flaws in it.
They are missing MAP, Knock sensor, ECT, ESS (speed sensor), and the 10mm bolt harnes ground on the thermostat housing which is very important sensors on the engine harness. They have listed every other one (to include the IACV, VTEC, etc..), but I thought I would point that out.
The current HPI (??) Hot Compacts & Import magazine actually has a very good and thorough walk-thru on doing an H22A swap into a DC2 GS-R.
Brian G from HASport I believe did the swap and did a fine job on taking pictures with the review.
HOWEVER...
While reviewing the whole article, I have noticed just little flaws in there...
the engine harness check list (which I have listed in the first post) has very little flaws in it.
They are missing MAP, Knock sensor, ECT, ESS (speed sensor), and the 10mm bolt harnes ground on the thermostat housing which is very important sensors on the engine harness. They have listed every other one (to include the IACV, VTEC, etc..), but I thought I would point that out.
10-29-2003, 03:02 PM
#37
Member
Re: (poison)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poison »</TD></TR><TR><TD CLASS="quote">
FYI, AEM ITR CAI, Prelude CAI does fit in EG's. I do know the ITR CAI fits in EK's, but am not 100% sure about the Prelude CAI.</TD></TR></TABLE>
I'm using an AEM GSR CAI right now. Fits well and it does the job nicely.
FYI, AEM ITR CAI, Prelude CAI does fit in EG's. I do know the ITR CAI fits in EK's, but am not 100% sure about the Prelude CAI.</TD></TR></TABLE>
I'm using an AEM GSR CAI right now. Fits well and it does the job nicely.
10-29-2003, 05:18 PM
#38
Honda-Tech Member
Re: [FAQ] H22A into Civic EG/EK INFORMATION Post all H22A Hybrid info here (poison)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poison »</TD></TR><TR><TD CLASS="quote">They are missing MAP, Knock sensor, ECT, ESS (speed sensor), and the 10mm bolt harnes ground on the thermostat housing which is very important sensors on the engine harness. They have listed every other one (to include the IACV, VTEC, etc..), but I thought I would point that out.</TD></TR></TABLE>
Yeah, I have seen that a lot in reviews/how-tos.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbogixxer »</TD></TR><TR><TD CLASS="quote">The sensor voltage is a BLK/YEL wire and the ECU signal is a PINK wire.
The colors are the same for JDM and USDM.</TD></TR></TABLE>
This is for OBD1, I will look at the OBD2 diagrams this week.
Yeah, I have seen that a lot in reviews/how-tos.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbogixxer »</TD></TR><TR><TD CLASS="quote">The sensor voltage is a BLK/YEL wire and the ECU signal is a PINK wire.
The colors are the same for JDM and USDM.</TD></TR></TABLE>
This is for OBD1, I will look at the OBD2 diagrams this week.
11-03-2003, 08:14 AM
#40
Senior Member
Thread Starter
Re: (Negative3Five)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Negative3Five »</TD></TR><TR><TD CLASS="quote">Is a 97 Prelude H22 with a Hydro tranny the same to instal with the shifter assembly?</TD></TR></TABLE>
Yes, the shifter assembly is slightly different, however. it's plastic rather than the metal shifter assembly.
I know there are a few EG'ers and EK'ers (that even a word? ) up on here that have pictures of them installed.
Yes, the shifter assembly is slightly different, however. it's plastic rather than the metal shifter assembly.
I know there are a few EG'ers and EK'ers (that even a word?
) up on here that have pictures of them installed.
11-04-2003, 05:14 AM
#44
Join Date: May 2003
Location: Riga, Latvia, Baltic State.
Posts: 1,126
Likes: 0
Received 1 Like
on
1 Post
Re: (H22EK)
Can you Guy's post some pics of H22 iron sleves? I'm allmoust done with this problem.
There was a post of sleved F22 and pic of all kind Honda engine sleves.
There was a post of sleved F22 and pic of all kind Honda engine sleves.
11-05-2003, 06:11 PM
#45
Join Date: Jul 2003
Location: sydney, nsw, australia
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Root79)
great thread on h22a/civic conversion ,, , i was wondering if i could do h22a spec s in a 92 teg ls ,, (hopefully re do the cam's pistons rods ect ect with better more durable parts for forced induction) and how much this conversion would end up costing me 
11-06-2003, 05:31 AM
#46
Re: (pouyan)
***********************update********************* ***************
go back to page 1 and i have put up info for
<U>EK'S WANTING TO USE PRELUDE USDM OBD2 EXT COIL DIZZY WITH A OBD2-->1 CONVERSION HARNESS AND OBD1 ECU (P13)</U>
************************************************** ****************
go back to page 1 and i have put up info for
<U>EK'S WANTING TO USE PRELUDE USDM OBD2 EXT COIL DIZZY WITH A OBD2-->1 CONVERSION HARNESS AND OBD1 ECU (P13)</U>
************************************************** ****************
11-06-2003, 10:51 AM
#47
Senior Member
Thread Starter
Re: (pouyan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pouyan »</TD></TR><TR><TD CLASS="quote">great thread on h22a/civic conversion ,, , i was wondering if i could do h22a spec s in a 92 teg ls ,, (hopefully re do the cam's pistons rods ect ect with better more durable parts for forced induction) and how much this conversion would end up costing me </TD></TR></TABLE>
I am not sure about DA integra mounts. Place Racing might have some, but you mainly need to look for a mount kit.
Everything else like wiring and such will be easy.
</TD></TR></TABLE>I am not sure about DA integra mounts. Place Racing might have some, but you mainly need to look for a mount kit.
Everything else like wiring and such will be easy.
11-06-2003, 05:19 PM
#48
Honda-Tech Member
Re: (poison)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poison »</TD></TR><TR><TD CLASS="quote">
I am not sure about DA integra mounts. Place Racing might have some, but you mainly need to look for a mount kit.
Everything else like wiring and such will be easy. </TD></TR></TABLE>
Yes, place racing does make a kit for DAs. But, with almost all odd ball mount kits that place makes, they are problems with figment. I best way to go is biuld your own or have a person that is in the field to it.
I am not sure about DA integra mounts. Place Racing might have some, but you mainly need to look for a mount kit.
Everything else like wiring and such will be easy. </TD></TR></TABLE>
Yes, place racing does make a kit for DAs. But, with almost all odd ball mount kits that place makes, they are problems with figment. I best way to go is biuld your own or have a person that is in the field to it.
11-06-2003, 10:57 PM
#49
Honda-Tech Member
Join Date: Jun 2001
Location: Tampa, FL, USA
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
I'm installing an h22a into an EK and I have the hcp mounts and A/C bracket. What Belt do I use. I'm guessing a four rib belt that is about as long as the stock belt.
Anyone that has kept A/C on the their h22a swap I'd appreciate the help.
Anyone that has kept A/C on the their h22a swap I'd appreciate the help.
11-07-2003, 06:31 AM
#50
Re: (hybrid_KJ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybrid_KJ »</TD></TR><TR><TD CLASS="quote">I'm installing an h22a into an EK and I have the hcp mounts and A/C bracket. What Belt do I use. I'm guessing a four rib belt that is about as long as the stock belt.
Anyone that has kept A/C on the their h22a swap I'd appreciate the help.</TD></TR></TABLE>
this would be interesting.. i've heard it works.. but have actually not heard of anyone doing that. i think H22EK has the ps. but.... thats about the only one i know of that has kept anything of the accessories...
Anyone that has kept A/C on the their h22a swap I'd appreciate the help.</TD></TR></TABLE>
this would be interesting.. i've heard it works.. but have actually not heard of anyone doing that. i think H22EK has the ps. but.... thats about the only one i know of that has kept anything of the accessories...
