Ian.G

Hi folks,

my AE86 is getting wired up at the moment and my donor engine came with a few broken connectors on the engine harness. I need to try and get the male ends of the connectors from the engine harness.

I think I need (check again tomorrow)

The exhaust cam sensor male connector (back left of cam cover)
The vtec solenoid/sensor male connector
The water/oil temp sensor male connector

Anyone help or point me in the direction of a wiring components place that may have em ?

Cheers

Ian.

TheMuffinMan

iTrader: (1)

S2000 partouts?

There are more than a few on S2ki

Ian.G

Yeah - we are going to try some breakers yards

I just wondered if anyone had been making up engine looms to run different ECU's and they had found a source for getting brand new male connectors to work with the various senders and sensors that are already on the engine. I think HALTEC may do their own s2000 looms for their ECU's so there must be a place to get them from (unless they use a small bridge loom onto the standard car engine harness)

I'll keep looking but if anyone comes up with anything I'd appreciate it.

Black S2K

sorry cant help. but cant wait for the build to be complete **** was lookin good

TheMuffinMan

iTrader: (1)

You do have this option as well......



http://www.hondaautomotiveparts.com/...ECTOR+(FR.)+(2)

I'm sure there's a place to purchase in UK as well?

*edit* Bleh, looks like those are just some of the more generic ones, here's the whole harness for $240 new

http://www.hondaautomotiveparts.com/...5=WIRE+HARNESS

Ian.G

Still drawing a bit of a blank on these guys - if anyone comes across a busted up loom we can cut the connectors off give us a shout - F20C not F22C (although I'm sure most of the sensors and connectors will be the same).