satan_srv

2.5" primaries/collector. What companies make this for the H22A1?

h22congee

Kamikaze Headers
" Kamikaze's extensive Research and Development
department has intensively studied the racing industry.
The 4 into 1 into 2 single outlet, two piece
Honda/Acura header system is the fruit of our research.
Our headers also feature the largest tubing available
of 1 3/4" tubing using 14 gauge mild steel.
Compared to standard headers of only 1 1/2" or 1 5/8".
Not only is our tubing larger but we also are the first to
offer 2 1/2" collector opening. "

source:http://members.aol.com/kmikzehpp/const.htm


[Modified by h22congee, 7:54 AM 9/20/2002]

satan_srv

they can't even spell horsepower!!

Looks like it's a custom job, good thing brullen exhaust is not too far away

bgod

just had a jun header but sold it. had a 2.4 inch collector.

satan_srv

How did you like it? How much power were you putting out at the time?

bgod

it was a friends. never dynoed but the before and after was very nice.

not much low end of course but the power near the vtec engagement point and top end was greatly improved. not sure if that's because the size of the collector or the beefy primaries and secondaries.

satan_srv

Fitment was fine i.e. unlike the SMS header? How much do they go for approximately?

bgod

new is about $1000. design is similar to mugen and no, doesn't require any hacking of any sort.

i just sold mine for $450 shipped. too bad you missed it.

satan_srv

Pissed off he missed it

SMSP

Production version shouldn't either.

satan_srv

Is this the 4-1 or the 4-2-1?

2point6

Dave, I should have the 4-1 on the car tomorrow. I should get some dyno time next week. SMSP

Honda318dx

4-2-1

.. With the 4-1, there just simply is not enough ground clearence with lowered cars, and having to trim up the subframe is a pain (just not enough room for the pipes)..

satan_srv

Did your beaten up 4-2-1 header get sold? Any production targets for the 4-2-1 header?

SMSP

Corey, you not telling me something????

Going to do one more prototype 4-2-1 to compare to the current one on Corey's car. I probably won't start building production versions until the end of the year. Sorry to the guys already on the build list.

Good luck 2 point6

kb58

Someone is on crack if they say they have 2.5" primaries...

bluelink16

This is Corey, under my Girlfriends name...

Don't worry Dave, the 4-2-1 is just great. Warren won't admit how much I pulled on his ITR at Lowes.

It was the 4-1 that got a little dinged up, and 2point6 (Scott) has it now, and is going to put it on his accord, we all are hoping to see good gains..

illusion

im still saving for the 4-2-1 and maybe an exhaust as well. sucks being a college student. :9

Jonathan_ED3

Elated he got it

Jonathan_ED3

Oh, and for those of you wondering about the Kamikaze Header, here's what the sales rep emailed me when I asked about their header for a '92+ Prelude VTEC:

*I hate when people can't spell my freakin name right!!!!!!*

'Dear Johnathan,

Thank you for your interest in our performance headers. We offer an application for your vehicle in either High Temp. Black Coating for $275.00, Nickel Polish Chrome for $295.00, or our all New Titanium Ceramic Coat for $330.00.
We believe we have the finest quality performance headers available with our latest technology 4 into 1 systems, with the largest tubing diameter of 13/4.GÇ¥ Dyno tested and race proven. Here at Kamikaze Performance Products we strive to provide quality race products with the newest technology.
Please give us a call if you have any further questions at the phone numbers below If you would like to place an order you can do so by phone/fax we accept most credit cards or by Cashiers check / Money order by mail.For shipping it is $18.00 for UPS ground.
We look forward in doing business with you. Thank you for your time and consideration of our product.


Sincerely,

Traci Contreras
Sales Marketing Manager
Kamikaze Performance Products
(909)548-6223
Fax (909)548-0922
12365 Central Avenue #B
Chino, CA. 91710'


I've seen one of their B series headers in person and it looked very nice. Friend said he felt a good after on the butt dyno with his B16. They make really nice pieces, and for the life of me I can't comprehend why they don't have a real website up yet.

satan_srv

Sorry I'm retarded, I guess what I mean is the primaries are the right size to flow to a 2.5" downpipe.

satan_srv

Bastard guy!!

Timmayeg

i would like a 4-1 but on my civic i think it would set way to low,
will a 4-2-1 stil make decent top end power?

Honda318dx

On the dyno, the 4-2-1 yeilded better top end power, by about 3 HP in the last thousand RPM's to redline..

h22congee!

er?
which header is this?
so yer saying that a 4-2-1 yield more top-end than a 4-1 ?! please clarify.