hondatuningboi96

I took the head off my motor to check to see if it was still good. Does anyone have the torque specs for these. I need all specs.

117

76 ft*lbs, IIRC.

98vtec

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 117 &raquo;</TD></TR><TR><TD CLASS="quote">76 ft*lbs, IIRC.</TD></TR></TABLE>

you are supposed to do it in steps IIRC.

like 25ftlbs, then 50ftlbs then the 76ftlbs.

117

He didn't ask about the steps, just the specs.

98vtec

just wouldnt wanna see him torque each bolt to 76ft lbs one by one

117

Might be interesting to see what his next thread would be!

hondatuningboi96

ok so is there a pattern? i need to know everything.

prelude_h22vtec

hondatuningboi96

thanks o by the way how's raleigh goin i used to live up there

prelude_h22vtec

its alright nothing special

117

http://www.helminc.com

I don't think I'll ever understand why people do this kind of work without the FSM...

hondatuningboi96

realllllllly?

vinuneuro

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 117 &raquo;</TD></TR><TR><TD CLASS="quote">http://www.helminc.com

I don't think I'll ever understand why people do this kind of work without the FSM...</TD></TR></TABLE>

That link should be a sticky by itself.

SteveoBA8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 117 &raquo;</TD></TR><TR><TD CLASS="quote">http://www.helminc.com

I don't think I'll ever understand why people do this kind of work without the FSM...</TD></TR></TABLE> Most people don't plan ahead

axlline

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 117 &raquo;</TD></TR><TR><TD CLASS="quote">http://www.helminc.com

I don't think I'll ever understand why people do this kind of work without the FSM...</TD></TR></TABLE>Because people are cheap and figure they can come on here and get the answers for free

117

Pffft...people don't blink at spending $500 on an exhaust, but won't spend $65 for a service manual? I don't think I'll ever understand it.

hondatuningboi96

reallly so why are u on this forum then. I'm pretty sure that u have Q/A on here just like everyone else!!!

Revi

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondatuningboi96 &raquo;</TD></TR><TR><TD CLASS="quote">reallly so why are u on this forum then. I'm pretty sure that u have Q/A on here just like everyone else!!!</TD></TR></TABLE>

Because simple stuff like that should be well researched before you even took the head off. And seeing how there is also a sequence and pattern for removing the head, we doubt you did that right.

Might want to take you head to check to see if its warped now.

117

You're right. I do have questions time to time, but not about something like R&R'ing a head. I have a service manual for that. I'm smart enough to know when I need to go to the service manual on how to do something right instead of looking on the interweb for a write up.

Thanks for reminding me why I don't come to the forum on occasion, or bother to post a reply.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondatuningboi96 &raquo;</TD></TR><TR><TD CLASS="quote">reallly so why are u on this forum then. I'm pretty sure that u have Q/A on here just like everyone else!!!</TD></TR></TABLE>

98vtec

lol

Mykizism

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondatuningboi96 &raquo;</TD></TR><TR><TD CLASS="quote">reallly so why are u on this forum then. I'm pretty sure that u have Q/A on here just like everyone else!!!</TD></TR></TABLE>

you are a douche..

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 117 &raquo;</TD></TR><TR><TD CLASS="quote">
Thanks for reminding me why I don't come to the forum on occasion, or bother to post a reply.

</TD></TR></TABLE>

lol Amen to that man

axlline

Bingo <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 117 &raquo;</TD></TR><TR><TD CLASS="quote">You're right. I do have questions time to time, but not about something like R&R'ing a head. I have a service manual for that. I'm smart enough to know when I need to go to the service manual on how to do something right instead of looking on the interweb for a write up.

Thanks for reminding me why I don't come to the forum on occasion, or bother to post a reply.

</TD></TR></TABLE>

hondatuningboi96

reallllly we'll i thought that this was a technical form not for someone to be smart and complain.

117

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondatuningboi96 &raquo;</TD></TR><TR><TD CLASS="quote">thanks o by the way how's raleigh goin i used to live up there</TD></TR></TABLE>

Yes, can't you tell it's a technical forum by these kinds of posts??

I wasn't complaining, just making an observation. Your question got answered, so be happy.

When you've spent as much time as I have fixing other peoples' screw ups and other shops' screw ups, maybe you'll understand.

hondatuningboi96

we'll sometimes u gotta keep ur observations to yourself and not take it out no nobody ok buh-bye now. O by the way i'm not one of ur customers.