SH Front Lower Ball joints, are they both the same on each side?
07-06-2010, 08:47 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2003
Location: Mi, USA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
SH Front Lower Ball joints, are they both the same on each side?
So I'm replacing all of the ball joints in the front of my 97 SH. I got all 4 lower ball joints (2 on each side) out of the knuckle. I bought 4 new lower ball joints from Autozone. Now the joints that go through the LCA I pressed in, they fit tight, whatever. The joints that go through the radius arms just slide right in the knuckle with no pressing or hammering.
I am assuming they are different sizes, or what? They visually look the same. I'm trying to get my Lude back together to get an alignment today, but I have a feeling both lower ball joints are different.
I am assuming they are different sizes, or what? They visually look the same. I'm trying to get my Lude back together to get an alignment today, but I have a feeling both lower ball joints are different.
07-06-2010, 09:08 AM
#2
something gnarly
Re: SH Front Lower Ball joints, are they both the same on each side?
Different part numbers on honda's parts site. That's the best I can do.. never owned or worked on an SH.
3 51220-SL5-013 JOINT, FR. BALL (LOWER)
4 51220-S30-N21 JOINT, BALL (LOWER)
3 51220-SL5-013 JOINT, FR. BALL (LOWER)
4 51220-S30-N21 JOINT, BALL (LOWER)
07-06-2010, 04:50 PM
#3
Honda-Tech Member
Re: SH Front Lower Ball joints, are they both the same on each side?
Thread
Thread Starter
Forum
Replies
Last Post
Kevins89notch
Honda Civic / Del Sol (1992 - 2000)
21
11-04-2013 06:17 AM
snatch
Honda Civic / Del Sol (1992 - 2000)
25
07-13-2005 04:54 PM
