extracrunchie

so i was wondering how much would it cost to replace the assembly? and now im just have 3 lug nut bolts, is it safe to drive with 3?

thanks

subydoored

you can to replace you need take the knuckle off get the spendle pressed out then you can put new stud while your at it also check the bearing after that is done need to get it pressed back in. napa got all the parts

extracrunchie

oh ok, i hope its cheap to replace......man i i lost like 2 lug nuts too, i dont know if someone is like f**king with me......or just ppl playing around and taking my lug nuts out...

prelude_h22vtec

you can just borrow a slide hammer from advance or autozone and use that to remove the hub. the only problem you face with that is it almost always ruins the bearings. i did it on mine and turned out ok though.
then just replace the studs. the studs themselves are pretty cheap.

extracrunchie

can you guys tell me what is that part called?

MUlrich07

idk what that part is called... however i had to replace 3 studs once lol. the studs themself are cheap, my bill was like 5 bucks total.

are you running bigger rims? i had 17s on my 3rd gen once with stock lug nuts and i think it barely got any threads on them, and it just finally vibrated lose, broke 3 studs and the 4th lugnut was starting to come undone when i pulled into my driveway. if this is the case, try gorilla lug nuts, they worked great for my car!

Darkbluelude

I drove on 3 studs for like 6 months all through the winter. It's not exactly the safest thing to do, but 3 held well.

It's tough to do by yourself so take it to pepboys if there's one in your area. Honda wanted like $300 to change. Pep boys changed my broken stud in about an hour or so and charged me $18 bucks, since my old one had already been air hammered out. I think they charge $36 or so if it's not. Good luck

oranginal

do a 5lug conversion while your at it