Installing coilovers
#1
I'm a Jackass
Thread Starter
Join Date: Sep 2005
Location: jackson, michigan, united stated
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
Installing coilovers
Are there any writeups for installing full coilovers on 4th gen preludes? Any help will be GREATLY APPRECIATED.. thanks
#2
Honda-Tech Member
Join Date: Aug 2005
Location: SB County
Posts: 874
Likes: 0
Received 0 Likes
on
0 Posts
you dont need one... its pretty basic. Take the rim off..and just spend a couple minutes and look at what you would have to unbolt. You may need a spring compressor just to get the stock springs out.
#4
Re: Installing coilovers (PEARLelectron)
I used this website for the fronts http://www.ntpog.org/mods/fift...shtml
and this website for the rears
http://www.geocities.com/joon525/Teins/Tein.htm
and this website for the rears
http://www.geocities.com/joon525/Teins/Tein.htm
#6
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: Installing coilovers (PEARLelectron)
Well, if you're installing full coilovers then you just take out the stock suspension as one piece and put the coilover setup in. But if it's something like a coilover sleeve that you have to install over a seperate shock, then you will need a spring compressor......just depends.
#7
Honda-Tech Member
Join Date: Apr 2006
Location: dirty jerzzzz
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
Re: Installing coilovers (Hawkze_2.3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_2.3 »</TD></TR><TR><TD CLASS="quote">Well, if you're installing full coilovers then you just take out the stock suspension as one piece and put the coilover setup in. But if it's something like a coilover sleeve that you have to install over a seperate shock, then you will need a spring compressor......just depends.</TD></TR></TABLE>
stole the words right outta my mouf
stole the words right outta my mouf
Trending Topics
#8
Honda-Tech Member
Join Date: Oct 2004
Location: VEGAS BABY, VEGAS, usa
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Re: Installing coilovers (Hawkze_2.3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_2.3 »</TD></TR><TR><TD CLASS="quote">Well, if you're installing fullif it's something like a coilover sleeve that you have to install over a seperate shock, then you will need a spring compressor......just depends.</TD></TR></TABLE>
I dont even bother w/ a compressor. I just stand on the shock and spring and then undo the top hat nut. You get a good rush right before it pops, but nutin really comes flying off.
I dont even bother w/ a compressor. I just stand on the shock and spring and then undo the top hat nut. You get a good rush right before it pops, but nutin really comes flying off.
Thread
Thread Starter
Forum
Replies
Last Post
Kyles ej1
Honda Civic / Del Sol (1992 - 2000)
15
09-25-2004 07:33 PM
Accord98
Honda Accord (1990 - 2002)
1
07-25-2003 11:20 PM
2001, 4th, coilover, coilovers, compressor, install, installing, prelude, rent, sleeves, springs, stock, suspension, tein, thread