How far can I push a fully built H22A????
09-27-2010, 07:08 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2008
Location: ATL United States
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
How far can I push a fully built H22A????
I have a H22a4 head port an polished EVERYTHING in it is by Super Tech an black nitrate. The cams are from Bisimoto I have the leve 2.4 an Bisimoto cam gears. The block is a JDM H22A its sleeved stock bore size JE Pistos 9:1 compression Egale rods balanced an micro polished crank.... An EVERYTHING is for turbo... My goal is to make around 750-900+hp I was wondering if that was posible on my motor an the way it is built and what kind of turbo to use also how much psi could it handle...???? Im open to any quetions and advice
09-27-2010, 07:18 AM
#2
formerly xmod_supra
Join Date: May 2009
Location: Charleston
Posts: 1,492
Likes: 0
Received 0 Likes
on
0 Posts
Re: How far can I push a fully built H22A????
From what i have been told by many on here. Its not about how much PSI/boost the motor can handle, Its about the HP. Cause Im sure the if you had a .50 trim turbo, you would need alot of PSI to get the same result as a turbo with .75 trim and low PSI.
But good luck with your Q! Seems like you have a good setup!
But good luck with your Q! Seems like you have a good setup!
09-27-2010, 12:32 PM
#5
Join Date: Apr 2009
Location: Ontario, CA U.S.A.
Posts: 813
Likes: 0
Received 0 Likes
on
0 Posts
Re: How far can I push a fully built H22A????
Hmmmm,
what will dictate your potential goals is what you use internals wise as well as turbo setup. Bearing this in mind you have a good starting setup but do not forget you will need a good engine management setup as well!
Please let me know what else I can assist you with
Randy@Bisimoto.com
what will dictate your potential goals is what you use internals wise as well as turbo setup. Bearing this in mind you have a good starting setup but do not forget you will need a good engine management setup as well!
Please let me know what else I can assist you with
Randy@Bisimoto.com
09-29-2010, 04:46 AM
#6
I live under a rock
Join Date: Apr 2003
Location: Purple Prelude, DE
Posts: 11,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: How far can I push a fully built H22A????
There's 800hp H22's out there.... the motors are just as capable as the B-series motors once they're built properly. You need a stout fuel system for that kinda power though, and a large frame turbo.
.
Trending Topics
09-30-2010, 08:11 AM
#8
Honda-Tech Member
Join Date: Apr 2010
Location: Daytona Beach, FL / Charlotte, NC
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Re: How far can I push a fully built H22A????
^^ what he said.
Oaks has a prelude making pretty nasty power well over 8, almost 9 last time i talked with them. be ready to break some stuff and have some spending money.
IMO i dont see the point for such high numbers unless your competing... you just cant really have fun with it cept for a few passes on the strip.. keep it at like 4-650 or so. You can almost make the same run times anyway since traction issues.
H series is more capable than B.. bro
Oaks has a prelude making pretty nasty power well over 8, almost 9 last time i talked with them. be ready to break some stuff and have some spending money.
IMO i dont see the point for such high numbers unless your competing... you just cant really have fun with it cept for a few passes on the strip.. keep it at like 4-650 or so. You can almost make the same run times anyway since traction issues.
H series is more capable than B.. bro
Thread
Thread Starter
Forum
Replies
Last Post
Drifter6508
Honda Prelude
3
11-18-2011 05:07 AM
