i have an 1997 h22a4 and had a bad clutch slip due to a bad rear main seal any help would be appreciated
first i removed tranny had flywheel resurfaced and replaced rea main seal replaced clutch and put tranny back on an ran grat then 2 days later what do you know its leaking again so we take it back off and the seal is still leaking am i missing somthing? we instaled te seal correctly and the seal retainer isnt leaking but maybe there is a common or known problem any help would be very much apreciated what are the feeler gauge clearances for the seal to crankshaft. thanks
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.