4th generation camber kit
#1
4th generation camber kit
i just bought 2" lowering springs and a camber kit for my 94 prelude. everything came in but a buddy told me the rear is for an integra. will it still work?
#2
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: 4th generation camber kit
No one can tell you that over the internet without knowing details and seeing your parts.
You probably won't even need a camber kit for just 2", I don't.
You probably won't even need a camber kit for just 2", I don't.
#3
Honda-Tech Member
Join Date: Feb 2006
Location: Norman, OK, USA
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4th generation camber kit
the integra rear kit is usually a replacement for the upper arm:
the prelude rear kit is usually a replacement for the upper arm mounts:
sometimes you'll find an eccentric ball joint for the upper arm:
but i don't know if those will work in the prelude's rear (and i'm not sure i would use them if they did)
so, what did you get?
#4
Honda-Tech Member
Join Date: Apr 2008
Location: miami, florida, united states
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4th generation camber kit
its not that bad a little expensive but to get it right it worth it check the internet for myers tire supply get the cataloge and check it comes in to sizes the lower you go the bigger u'll need after installing go to alignment mechanic tell him to check what u need to bring the wheels bck out and go from there, ask for a check and a print out only DONT let them do the alignment till after installing the camber kits
#5
Honda-Tech Member
Re: 4th generation camber kit
How much (-) camber do you have from a 2" drop. My experience tells me 2*......which I think is a bit much on a street car for tire preservation.
#6
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: 4th generation camber kit
Also looks like it may be closer to 1.5"? I just put new suspension on it recently, and haven't really seen a stock height Lude to compare it to in many years
Trending Topics
#8
Re: 4th generation camber kit
probably not, but without seeing the parts you have, we can't know for sure.
the integra rear kit is usually a replacement for the upper arm:
the prelude rear kit is usually a replacement for the upper arm mounts:
sometimes you'll find an eccentric ball joint for the upper arm:
but i don't know if those will work in the prelude's rear (and i'm not sure i would use them if they did)
so, what did you get?
the integra rear kit is usually a replacement for the upper arm:
the prelude rear kit is usually a replacement for the upper arm mounts:
sometimes you'll find an eccentric ball joint for the upper arm:
but i don't know if those will work in the prelude's rear (and i'm not sure i would use them if they did)
so, what did you get?
Thread
Thread Starter
Forum
Replies
Last Post