h22 cam gears. Need a little help..
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
h22 cam gears. Need a little help..
Hi guys
Ok I pulled the engine a month ago because I had a sleeve that sunk and eventually a dead head gasket..
Now I got the engine back together and about to install it in the car again.
I noticed something while I was putting stuff back on the engine.
The cam gear position. I have the skunk2 cam gears
Heres a picture of how its installed now, crank is at TDC there
This picture was from a month ago.
U see the marks is way off compared to the first picture, but we are not sure if this picture is taken only for show and corrected afterwards. If you understand me.
What do you guys think? Is the first picture the correct way to do it?
Thanks
/Rasmus
Denmark
Ok I pulled the engine a month ago because I had a sleeve that sunk and eventually a dead head gasket..
Now I got the engine back together and about to install it in the car again.
I noticed something while I was putting stuff back on the engine.
The cam gear position. I have the skunk2 cam gears
Heres a picture of how its installed now, crank is at TDC there
This picture was from a month ago.
U see the marks is way off compared to the first picture, but we are not sure if this picture is taken only for show and corrected afterwards. If you understand me.
What do you guys think? Is the first picture the correct way to do it?
Thanks
/Rasmus
Denmark
Thread
Thread Starter
Forum
Replies
Last Post
so_vayne
All Motor / Naturally Aspirated
8
12-11-2018 11:36 AM
km96
Honda Civic / Del Sol (1992 - 2000)
15
07-23-2013 10:40 AM
vivite_sir
K Series
4
04-11-2013 08:43 PM