FS: Arias Custom Forged H22a pistons
#1
Member
Thread Starter
FS: Arias Custom Forged H22a pistons
Permission obtained from Lone Luder
Arias Forged Pistons
87mm (stock) bore
11.2:1 compression ratio (11.5:1 in an H23 VTEC, 12.3:1 in an H23)
used 7000 miles
with rings
$400 shipped.
with rods $600 shipped
Modified by satan_srv at 12:35 AM 5/30/2003
Arias Forged Pistons
87mm (stock) bore
11.2:1 compression ratio (11.5:1 in an H23 VTEC, 12.3:1 in an H23)
used 7000 miles
with rings
$400 shipped.
with rods $600 shipped
Modified by satan_srv at 12:35 AM 5/30/2003
#4
Member
Thread Starter
Re: FS: Arias Custom Forged H22a pistons (Boosted97Lude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted97Lude »</TD></TR><TR><TD CLASS="quote">awww. come on, you bumped it while it was still on the first page, no fair </TD></TR></TABLE>
ok I'll be good from now on
ok I'll be good from now on
#6
Re: FS: Arias Custom Forged H22a pistons (satan_srv)
I'd love to get that compression ratio without re-sleeving or milling the head. Is there any way to use those pistons with stock sleeves? What about trick rings?
Trending Topics
#8
Member
Thread Starter
Re: FS: Arias Custom Forged H22a pistons (Mike95lude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mike95lude »</TD></TR><TR><TD CLASS="quote">OT: But is your new motor installed and running yet?</TD></TR></TABLE>
Motor is in.
1000 miles down....up to 5000rpms....car pulls like a ****
Motor is in.
1000 miles down....up to 5000rpms....car pulls like a ****
#13
Member
Thread Starter
Re: FS: Arias Custom Forged H22a pistons (4bidden)
oh sorry....I can't surf H-T at work anymore so I am like never on here. Let me get some pics of tomorrow
#14
Member
Thread Starter
Re: FS: Arias Custom Forged H22a pistons (satan_srv)
I cleaned up one, moderately
These are currently on H23 rods that were shotpeened and rebushed for floating wrist pin which costs a fair bit of dough
I'd rather sell them as a package.
These are currently on H23 rods that were shotpeened and rebushed for floating wrist pin which costs a fair bit of dough
I'd rather sell them as a package.
Thread
Thread Starter
Forum
Replies
Last Post
Solo2Vtec
Classifieds: Forced Induction
4
03-02-2003 03:58 PM