Prudz_lude

iTrader: (1)

So i know the OEM wheel does not use a pilot bearing. I am looking at fidanza flywheels and i'm getting really confused. Several people have said that their h22 flywheels from fidanza use a pilot bearing. However, when i contacted some stores they said the flywheels do not come with a pilot bearing. Looking further into it even on ebay from sellers like gripforce they do not include a pilot bearing. Could someone shed some light on the requirements?

The reason why is because i have a exedy clutch already in great shape, i just want to know when i order the flywheel seperately i don't need the pilot bearing because as far as gripforce and a few other sellers are concerned their is no bearing included in the prelude clutch kit or flywheel kit.

nus_dogg

My Fidanza flywheel doesn't have a pilot bearing. Any F or H flywheel doesn't come with one. Only D & B series engines have them.

h22blklude92

mine has one

PirateMcFred

Stock H-series flywheels have a pilot bushing not a bearing. If you can pop the old one out of your stock flywheel and push it back in the new one then you should be set.

pprowler6

my findanza has one as well....

LOrangeH22hatch

iTrader: (1)

Correct the h22 uses a pilot bushing instead of a bearing just like the k20.

prelude72569858

I have a fidenza flywheel on my H22A it clearly has a bearing not a bushing, bought it on ebay a while ago, the guy asked me if i wanted to have it pressed in for another $15, never anwsered or payed for the bearing and it showed up installed?? point being it has a bearing, dont worry about it, buy a new flywheel it will work

pprowler6

agreed mine is def a bearing and not a bushing so i dunno what to tell you. i guess some come with bearings and some come with bushings. I do have a stock flywheel laying around i'll take a look at that one and see what it has.

Prudz_lude

iTrader: (1)

Well i went to the dealership before i made this thread and they said the oem flywheel has a brass bushing. I bought a fidanza flywheel a few years back and it did have the bearing. However, the kits i am seeing now and even the flywheels sold seperately don't seem to have the bearing. Even when i ask the sellers they are telling me they do not include it. Basically i'm uber confused. I bought the flywheel already though so i guess i will see what comes with it when it gets here.