Exact pinout for p13 and p14 ECU
08-12-2006, 06:18 PM
#1
Member
Thread Starter
Join Date: Feb 2003
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
Exact pinout for p13 and p14 ECU
Alright, right now I am just finishing my swap (long over do) and am doing the wireing.
I am using a JDM H22a OBD engine with a USDM p14 Harness and a p13 ecu.
On the H23a engine, there are 2 coolant sensors, where on the h22a there is only one. What I would like to do is with the one that is not used, I was going to lengthen the plug and use it for the VTEC Oil Pressure sensor and then in the cabin, just move the one pin to the right location.
Now what I need is the EXACT pinout of a p13 and a p14 ecu, preferbally side to side. I do know what an OBD1 pinout looks like, however, that covers all obd1 engines and will not tell me what I need to know.
I am using a JDM H22a OBD engine with a USDM p14 Harness and a p13 ecu.
On the H23a engine, there are 2 coolant sensors, where on the h22a there is only one. What I would like to do is with the one that is not used, I was going to lengthen the plug and use it for the VTEC Oil Pressure sensor and then in the cabin, just move the one pin to the right location.
Now what I need is the EXACT pinout of a p13 and a p14 ecu, preferbally side to side. I do know what an OBD1 pinout looks like, however, that covers all obd1 engines and will not tell me what I need to know.
08-12-2006, 07:14 PM
#2
moderator emeritus
08-14-2006, 05:42 AM
#3
Honda-Tech Member
Join Date: Nov 2002
Location: Melbourne, VIC, australia
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
10-02-2023, 07:13 PM
#4
Re: Exact pinout for p13 and p14 ECU
So that info is wrong. I have a 93 prelude. Vtec is green yellow. Others are different also I know that. That’s coming from the helms my butt. Shoot Evan in the Chilton it’s better info
Thread
Thread Starter
Forum
Replies
Last Post
