Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
#1
Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
i have a 2000 prelude sh it has.. sk2 IM sk2 70mm tb msd ignition box fuel rail test pipe muffler vibrant manual tensioner cam gears set at stock....
obd1 chipped ecu... it was running very well and good for a while but now im getting a cyp code 9 after i ripped it....
heres what i tried new cap/rotor, redid all ignition wires to ensure no heat is hitting it and was sealed with shrink wrap (was done slopply but was fine), looked at all my ecu wires they where fine (i did cut them before for vafc2 but i rewired them using shrink wrap), fuel system is ok, i put stock fuel system back and it still gave the code 9. replaced ignitor... what else can it be... i tried using just the stock coil w/o any msd it still gave the code....
which leaves me to beleave it is the actual cyp sensor itself inside the dizzy... can any1 confirm before i buy a new dizzy
obd1 chipped ecu... it was running very well and good for a while but now im getting a cyp code 9 after i ripped it....
heres what i tried new cap/rotor, redid all ignition wires to ensure no heat is hitting it and was sealed with shrink wrap (was done slopply but was fine), looked at all my ecu wires they where fine (i did cut them before for vafc2 but i rewired them using shrink wrap), fuel system is ok, i put stock fuel system back and it still gave the code 9. replaced ignitor... what else can it be... i tried using just the stock coil w/o any msd it still gave the code....
which leaves me to beleave it is the actual cyp sensor itself inside the dizzy... can any1 confirm before i buy a new dizzy
#2
Honda-Tech Member
Join Date: Mar 2001
Location: DFW, USA
Posts: 5,695
Likes: 0
Received 0 Likes
on
0 Posts
Re: Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
the cyp is behind the T-belt cover. These sensors usually cost around $150 give or take, cause it's the CYP and TDP linked together.
#3
B*a*n*n*e*d
Join Date: Nov 2009
Location: Pensacola, FL
Posts: 1,538
Likes: 0
Received 0 Likes
on
0 Posts
Re: Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
make sure your exhaust cam gear did not slip. If it slipped, it will throw a CYP check engine light as well. If it didnt slip, you will need to replace the distributor.
________
CLASS ACTION LAWFIRM
Last edited by q16racer; 03-13-2011 at 04:42 PM.
#4
Honda-Tech Member
Join Date: Aug 2005
Location: Macon, GA, USA
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
Re: Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
#6
B*a*n*n*e*d
Join Date: Nov 2009
Location: Pensacola, FL
Posts: 1,538
Likes: 0
Received 0 Likes
on
0 Posts
Re: Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
so tell me where the CKP is.....
CYP is in the distributor, CKP is on the oil pump for OBD2 engines.
________
Tube 8
CYP is in the distributor, CKP is on the oil pump for OBD2 engines.
________
Tube 8
Last edited by q16racer; 03-13-2011 at 04:42 PM.
#7
Honda-Tech Member
Join Date: Mar 2001
Location: DFW, USA
Posts: 5,695
Likes: 0
Received 0 Likes
on
0 Posts
Re: Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
That's what I might be thinking then, is the CKP :p....I actually just changed that sensor or whatever it is inside the dizzy a few months ago. You won't need a whole new dizzy, you'll just need that sensor which Auto Zone sells for around $100 or so with lifetime warranty
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2007
Location: San Francisco, California, USA
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Re: Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
CYP is in the distributor, CKP is on the oil pump for OBD2 engines.[/QUOTE]
....YEP, just replaced my ckp sensor, and it was on the oil pump, and cyp is in the dizzy... check the helms manual people!
....YEP, just replaced my ckp sensor, and it was on the oil pump, and cyp is in the dizzy... check the helms manual people!
#9
Re: Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
my Obd2 US ecu does not throw a CYP code, could it be the obd1 ecu something went wrong in there? we only have crappy tires and parts source here, they dont sell cyp sensors inside the dizzy
#12
Honda-Tech Member
Re: Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
I had the same issue a couple weeks ago. My previous motor was dyno tuned, and cam was set -4 degrees. The new motor was throwing a code 9. In an attempt to start from scratch, I set the cam back to 0, and the code hasn't been back since. My .02 would be the cam could be off as someone mentioned earlier...
#13
Re: Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
my cam gears are at 0 right now tho. it was never tuned for them i added that later on, sorry what do you mean by .02
#14
Honda-Tech Member
Re: Code 9 CYP Sensor h22a4 Prelude OBD1 chipped HELPPPP
Sorry to bump an ancient thread....but I'm having the same problem(s)....I just bought the whole CKP/TDC sensor assembly at the local auto parts store but now I'm seeing that the CYP sensor is indeed different and inside the distributor? If so, where did you guys purchase it?!?
Thread
Thread Starter
Forum
Replies
Last Post