the lude shakes or shudders very hard before clutch engages, all motor mounts are good... this a new clutch with approx 100 miles, it was fine until a few days ago, once the clutch engages and gear shifts everything's its good, the shake only happens on low rpm engagement, when i rev up to about 4k to 5k to take off it the car doesn't shake... its a stage 4 xtd clutch kit (un-sprung disc) and used fidanza flywheel with new friction surface, if your going to come bash on the product don't waist your time on this thread, thanks in advance...
I think its normal for the set up you have to shake at low RPMs. I have a clutch masters stage 4 and it does the same ****. Basically when you shift at a low rpm its going to vibrate. I hope you have a turbo set up, or running atleast enough power for it.
my buddy had a mustang and replaced the clutch but didn't get the flywheel resurfaced, and every time he put the clutch in the entire car would shake.
if it is a new or resurfaced flywheel then its probably from having the upgraded clutch
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.