97G_TechLX

OK so my friend has a 91 prelude with a b20a an 5speed. K well long story short bought an h22 an his maincaps were missn so the h22block is no good! So he has the head an intake to sell an wants to buy a f22 vtec. How much is involved with this swap anyone seen or done this before? Or should he turbo the b20 etc... wants around 300-400hp i said build the b20??? Are the f22's good to build on?

97G_TechLX

no advice given going with the b20 build.

1funryd

This is the wrong place to ask for any H/F swap in a 3rd gen Prelude. You need to go to: www.p r e l u d e p o w e r.com(no spaces).

I have collected all the information that your friend will need to do that swap.

Make sure to go to the 3rd gen section and into the FAQs at the top of the forum, that is where its sticked at.

Passin_Thru

Glad I Checked this post before I asked a similar question. Thanks for the link Fun. And thnx for askin the initial Q Tech.