thumper64

I did replace my plugs with bkr7e-11, have a chinese obd2-obd1 adapter and running Hondata on a P28 with ID1000 injectors using the plug in values for the dead times it offers.

It started running rough, then ran on 3 then 2 then 1 cylinder and now won't start.

I did replace my plugs last time I tried to start it, and there was no change.

I still have to try these, but I have another OBD2-obd1 adapter, and today I just got another distributor, plugs, and a coil in the mail, and I can reflow the solder on the main relay. What could I be missing if the distributor or coil aren't bad?

snobordboy

Wow, I hope your engine is waaaay different than stock. Some specs may help, but you need to get tuned for those injectors to run right.