RC51 Cams
09-23-2003, 09:23 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Stockton, Ca, USA
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
RC51 Cams
Got a 2000 rc51 and was going to upgrade the cams. I have heard of the kelly engineering cams are good. Was wondering if anyone out there ran them and if there are any other brands to consider
09-23-2003, 09:56 AM
#2
Honda-Tech Member
Join Date: May 2000
Location: San Gabriel, CA
Posts: 9,817
Likes: 0
Received 0 Likes
on
0 Posts
Re: RC51 Cams (TrblPinoy1)
Geez man. So now you've got two F3s AND an RC51?! Congrats on the purchase (lucky bastard). Sorry, I don't know anything about your cams. 
09-23-2003, 10:00 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Stockton, Ca, USA
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Re: RC51 Cams (marmaladeboy)
you know of any good kawai sites...I also picked up a 99 ninja for stuntin...the only thing is the motor is bad
09-23-2003, 10:57 AM
#4
What is this crap?
Re: RC51 Cams (TrblPinoy1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TrblPinoy1 »</TD></TR><TR><TD CLASS="quote">you know of any good kawai sites...I also picked up a 99 ninja for stuntin...the only thing is the motor is bad</TD></TR></TABLE>
you can still roll it down a hill and do a stoppie at the bottom
you can still roll it down a hill and do a stoppie at the bottom
09-23-2003, 11:01 AM
#5
Join Date: Nov 2001
Location: the big brown truck is my daddy
Posts: 3,003
Likes: 0
Received 1 Like
on
1 Post
Re: RC51 Cams (TrblPinoy1)
I've got the same. You can swap an 00-02 engine in easily. Gives you around 15 up top. maybe 6lbft all around. Also 00-02 nose swaps right in. Drop one up front and go up two in the rear and you'll be just fine. Btw, the steering headbearings aren't the strongest things so look into having one around as a spare. I've only gone through one but stunting might punish it. Btw, if you're interested in a yoshi full race system I'm taking mine off. Puttin the 6r back on the street. Also have matching needles...
09-23-2003, 08:07 PM
#6
Junior Member
Join Date: Aug 2003
Location: San Diego, CA
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
Re: RC51 Cams (TrblPinoy1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TrblPinoy1 »</TD></TR><TR><TD CLASS="quote">Got a 2000 rc51 and was going to upgrade the cams. I have heard of the kelly engineering cams are good. Was wondering if anyone out there ran them and if there are any other brands to consider</TD></TR></TABLE>
Contact Dan Kyle
http://www.kyleusa.com
Contact Dan Kyle
http://www.kyleusa.com
Thread
Thread Starter
Forum
Replies
Last Post
russian_racer
Honda CRX / EF Civic (1988 - 1991)
4
06-05-2003 05:59 PM
