CB750 Valve timing - Honda-Tech

Go Back   Honda-Tech > Honda and Acura Model-Specific Technical Forums > Honda Motorcycles
Sign in using an external account
Register Forgot Password?
Search



CB750 Valve timing

Reply
 
 
 
 
LinkBack Thread Tools Search this Thread
Old 05-17-2010, 10:23 AM   #1
Trial User
 
Join Date: Jul 2009
Posts: 4
iTrader Rating: (0)
Default CB750 Valve timing

I have been trying to sort out running problems on my 1981 CB750CB It was running badly spitting with odd backfire.It was also breaking down with wet plugs,The carbs on the bike were VB52C jetted P68 S75 They were butchered and only scrap I have tried a set on VB42A carbs with no improvement.I have replaced Ign coils,leads,and plug caps.Compression is from 120 to 150.On checking the valve timing I find that With the Dots on Cam chain sprockets lined up with the Cyl head the F mark is lined up not the T as in the Manual. Can I reposition timing by loosening Cam chain tensioners or do I have to loosen Camshafts.
pateli is offline   Reply With Quote
Old 05-17-2010, 10:38 AM   #2
Honda-Tech Member
 
Jasper_db1's Avatar
 
Join Date: Dec 2003
Location: Aliso Viejo, Ca, USA
Posts: 3,265
iTrader Rating: (0)
Send a message via AIM to Jasper_db1
Default Re: CB750 Valve timing

Typically, all you need to do is pull the chain tensioner to loosen the chain enough to reposition the cams. Are you sure the crank is @ TDC when you checked the camshaft position?

Also, if it's an automatic type tensioner, remove it and reset it before reinstallation. Your manual should have the details.
__________________
Everything I touch turns to ****. I have the anti-Midas touch.
1995 Yamaha YZF600R / 2002 Honda RC51 / 1995 Kawasaki KLR650
Jasper_db1 is offline   Reply With Quote
 
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing Valve Seals on K24A1 in 2003 CRV zpinch K Series 7 04-27-2015 05:40 AM
Honda CB750 DOHC, general and perfomance questions. Snail Tuning Honda Motorcycles 4 11-13-2014 06:38 PM
How to: Replace Headgasket F22B2 NeKe1point0 Honda Accord (1990 - 2002) 60 10-22-2014 07:22 PM
Worth rebuilding this? beren All Motor / Naturally Aspirated 11 07-15-2013 07:38 PM
Kawi 750 bogs when accelerating falcongsr Honda Motorcycles 7 12-11-2001 12:39 PM


Tags
1981, 750, adjust, backfire, cam, carb, cb, cb750, cb750k, honda, problems, set, timing, valve, vb42a

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:46 AM.



2014 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Emails & Contact Details