GSR Blades
#1
Honda-Tech Member
Thread Starter
GSR Blades
Okay, I test fit one of the GSR Blades today. Keep in mind...I didn't clean them up. I'll save that for when I add some winter tires. *which is why I'm not posting this in the A/C forum* I weighed both wheels + tires for fun. There are variables to consider:
1) The GSR Blades were the same tire size as the Fit Sport OEM tires, but the were Michelin XGT (195/55). They are worn down to the cords on the inside of the tire. I'm sure the tires might vary in weight between them with full tread.
2) I'm using a digital bathroom scale. It's of good quality...but it's just not the same since I had to balance the Fit Sport wheel a little to get it to stay upright without falling over. The GSR blade sat nicely however.
If you can't tell by the pics I weighed the Fit Sport wheel + tire at 35.2 lbs and the GSR Blade + tire at 31.6 lbs.
Anyways, here are the pics. I think they look good...almost like they were made for the car.
1) The GSR Blades were the same tire size as the Fit Sport OEM tires, but the were Michelin XGT (195/55). They are worn down to the cords on the inside of the tire. I'm sure the tires might vary in weight between them with full tread.
2) I'm using a digital bathroom scale. It's of good quality...but it's just not the same since I had to balance the Fit Sport wheel a little to get it to stay upright without falling over. The GSR blade sat nicely however.
If you can't tell by the pics I weighed the Fit Sport wheel + tire at 35.2 lbs and the GSR Blade + tire at 31.6 lbs.
Anyways, here are the pics. I think they look good...almost like they were made for the car.
#4
Honda-Tech Member
Thread Starter
Re: GSR Blades (ITR 00-0477)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR 00-0477 »</TD></TR><TR><TD CLASS="quote">You gonna paint the blades?
My vote is for bronze. </TD></TR></TABLE>
As of right now I don't have any plans to. Mine are a little beat up, but I've actually considered using some summer tires on these and then figure out my winter situation later. Possibly get some 14" steelies or HX's for winter.
My vote is for bronze. </TD></TR></TABLE>
As of right now I don't have any plans to. Mine are a little beat up, but I've actually considered using some summer tires on these and then figure out my winter situation later. Possibly get some 14" steelies or HX's for winter.
#5
Honda-Tech Member
Re: GSR Blades (Yellow Dragon)
Hey those look really good! I would not paint them personally.
You could also run the blades in front and oems in back for a true 'custom' look
You could also run the blades in front and oems in back for a true 'custom' look
#6
Honda-Tech Member
Thread Starter
Re: GSR Blades (jetydosa)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jetydosa »</TD></TR><TR><TD CLASS="quote">You could also run the blades in front and oems in back for a true 'custom' look </TD></TR></TABLE>
I'd be mad hardparking USDM style y0!
I'd be mad hardparking USDM style y0!
Trending Topics
#14
Honda-Tech Member
Thread Starter
Re: (spoonGD1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoonGD1 »</TD></TR><TR><TD CLASS="quote">not bad i reckon , only the 2 rims? or u hav all 4 corners?</TD></TR></TABLE>
I have all 4. I was just test fitting 1 of them. I was going to use them for winter, but I've decided to take a gamble and not get winter tires. I'll buy some summer tires for the Blades in the spring.
I have all 4. I was just test fitting 1 of them. I was going to use them for winter, but I've decided to take a gamble and not get winter tires. I'll buy some summer tires for the Blades in the spring.
#17
Honda-Tech Member
Join Date: Nov 2005
Location: SoCAL
Posts: 2,168
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ShinHed)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShinHed »</TD></TR><TR><TD CLASS="quote">GSR mesh would also look sweet.</TD></TR></TABLE>
thats LS mesh
thats LS mesh
#18
Honda-Tech Member
Join Date: Nov 2003
Location: Dodging Cones
Posts: 3,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Nighthawk R18)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nighthawk R18 »</TD></TR><TR><TD CLASS="quote">
thats LS mesh </TD></TR></TABLE>
Actually, a few GSR's came with the meshies. I would know, my friends mom's teg has them as well as 1 other friends. The way they came from the dealer.
thats LS mesh </TD></TR></TABLE>
Actually, a few GSR's came with the meshies. I would know, my friends mom's teg has them as well as 1 other friends. The way they came from the dealer.
#19
Honda-Tech Member
Join Date: Nov 2005
Location: SoCAL
Posts: 2,168
Likes: 0
Received 0 Likes
on
0 Posts
Re: (J Rod)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by J Rod »</TD></TR><TR><TD CLASS="quote">
Actually, a few GSR's came with the meshies. I would know, my friends mom's teg has them as well as 1 other friends. The way they came from the dealer. </TD></TR></TABLE>
i stand corrected
Actually, a few GSR's came with the meshies. I would know, my friends mom's teg has them as well as 1 other friends. The way they came from the dealer. </TD></TR></TABLE>
i stand corrected