► [:// HT's OFFICIAL Honda Fit/Jazz Picture Thread ]
#3302
Honda-Tech Member
Re: ► [:// HT's OFFICIAL Honda Fit/Jazz Picture Thread ]
Just noticed the two silver "buttons" on the rear fender. Are those the things you put a rubber band around to keep the fenders together? Do you have them on the front too?
#3303
Re: ► [:// HT's OFFICIAL Honda Fit/Jazz Picture Thread ]
#3304
Honda-Tech Member
Re: ► [:// HT's OFFICIAL Honda Fit/Jazz Picture Thread ]
Depends if you have big tires or wide rims the inner fender wells need to be trimmed and some mounting points for the fender get shaved off. So the need for another system to hold the fenders together may be needed.
#3305
Honda-Tech Member
Re: ► [:// HT's OFFICIAL Honda Fit/Jazz Picture Thread ]
Negative only the back but yes their quick releases. When the fenders were rolled and pulled the mounting brackets were shaved off like ^^ said. Plus I kinda like how they look lol. I just went lower in the front and I might have to start using them for the fronts too.
#3311
Honda-Tech Member
Join Date: Nov 2007
Location: Toronto, Ontario, Canada
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
#3316
#3321
Re: ► [:// HT's OFFICIAL Honda Fit/Jazz Picture Thread ]
Thanks, picked this beauty up awhile back but the weather has been terrible here, <Kentucky> I was able to pull her into the back yard and snap some pics after work before the sun went down
#3322
Honda-Tech Member
Enkei RPF1 16" wheels on my Honda Fit GD3
Hi,
I just got my Fit GD3 a few weeks ago. I thought about this car when it originally came out in 2007 and I finally got it now. I am loving it so far.
Here is a stock picture:
Here are a few pictures with the Enkei RPF1 16" wheels with 205/45/16 Bridgestone Potenza tires. The fender gap is very visible now with these wheels so I ordered H&R Sport springs and KYB shocks.
Getting the exhaust done on my car:
Custom Magnaflow cat-back exhaust:
- Magnaflow muffler
- Resonator delete
- pipe changed from resonator to the tip with 1/4" increase in diameter
- no shiny tips
- painted black for a clean look to match with the black Enkei RPF1 wheels.
I just got my Fit GD3 a few weeks ago. I thought about this car when it originally came out in 2007 and I finally got it now. I am loving it so far.
Here is a stock picture:
Here are a few pictures with the Enkei RPF1 16" wheels with 205/45/16 Bridgestone Potenza tires. The fender gap is very visible now with these wheels so I ordered H&R Sport springs and KYB shocks.
Getting the exhaust done on my car:
Custom Magnaflow cat-back exhaust:
- Magnaflow muffler
- Resonator delete
- pipe changed from resonator to the tip with 1/4" increase in diameter
- no shiny tips
- painted black for a clean look to match with the black Enkei RPF1 wheels.
Last edited by almirx101; 12-24-2014 at 08:22 AM.
#3323
Honda-Tech Member
Re: ► [:// HT's OFFICIAL Honda Fit/Jazz Picture Thread ]
Hi,
I just got my Fit GD3 a few weeks ago. I thought about this car when it originally came out in 2007 and I finally got it now. I am loving it so far.
Here is a stock picture:
Here are a few pictures with the Enkei RPF1 16" wheels with 205/45/16 Bridgestone Potenza tires. The fender gap is very visible now with these wheels so I ordered H&R Sport springs and KYB shocks.
Getting the exhaust done on my car:
Custom Magnaflow cat-back exhaust:
- Magnaflow muffler
- Resonator delete
- pipe changed from resonator to the tip with 1/4" increase in diameter
- no shiny tips
- painted black for a clean look to match with the black Enkei RPF1 wheels.
=================
HERE ARE SOME UPDATES SINCE LAST TIME:
I lowered the car. I did all my mods within 30 days after purchasing the car.
- Enkei wheels and Bridgestone tires
- Magnaflow custom cat-back exhaust
- H&R Sport springs (lowering 1.6") and shock replacement
- Karcepts shift ****
Now is the time to enjoy.
Here are some pictures:
Almir
almirsCorner.com
2008 Honda Fit 5-speed manual
2007 Honda Pilot LX
I just got my Fit GD3 a few weeks ago. I thought about this car when it originally came out in 2007 and I finally got it now. I am loving it so far.
Here is a stock picture:
Here are a few pictures with the Enkei RPF1 16" wheels with 205/45/16 Bridgestone Potenza tires. The fender gap is very visible now with these wheels so I ordered H&R Sport springs and KYB shocks.
Getting the exhaust done on my car:
Custom Magnaflow cat-back exhaust:
- Magnaflow muffler
- Resonator delete
- pipe changed from resonator to the tip with 1/4" increase in diameter
- no shiny tips
- painted black for a clean look to match with the black Enkei RPF1 wheels.
=================
HERE ARE SOME UPDATES SINCE LAST TIME:
I lowered the car. I did all my mods within 30 days after purchasing the car.
- Enkei wheels and Bridgestone tires
- Magnaflow custom cat-back exhaust
- H&R Sport springs (lowering 1.6") and shock replacement
- Karcepts shift ****
Now is the time to enjoy.
Here are some pictures:
Almir
almirsCorner.com
2008 Honda Fit 5-speed manual
2007 Honda Pilot LX
Last edited by almirx101; 02-01-2015 at 12:45 PM.