Go Back   Honda-Tech > Honda and Acura Model-Specific Technical Forums > Honda Element & CR-V
Sign in using an external account
Register Forgot Password?
Search


Welcome to Honda-Tech!
Welcome to Honda-Tech.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!


Reply
 
 
 
submit to reddit
 
LinkBack Thread Tools Search this Thread
Old 01-06-2012, 08:09 AM   #1
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Thought i would Share a Build Thread of my Wife's Daily Driver, a couple Peeps ask'd about it. Make all my Updates into one Area.
Explanation for Lift at Bottom of OP. Please feel free to Provide Negative or Positive Feedback, Thank you. (All Photos are Upload w/ Facebook, Link Below)
http://www.facebook.com/media/set/?s...5032740&type=1

Recently Purchased 27Nov11' this 98' EX 5 Speed Manual AWD CR-V for my Wife as a New Daily Driver. Has 215K but Runs like a Champ. Order'd a Bunch of Parts already for it just wait'n to Arrive. Only down Fall is the OME Lift is about a Month wait (BS after wait'n a Full Month i Call'd them 3 Days after Except'd Delivery Date&they Stated it was another 4 week wait, Cancel'd on the Spot. I will be go'n w/ Ironman Coils Springs since they are in house made&Stock'd Ready at all Times)

Order'd Part's List so Far:
Custom Billet Aluminum Strut Spacers (Temporary)
OME Complete 2" Lift Kit (Cancel'd 5Jan12')
Ironman Coil Spring Lift (Replacement for OME Bad Customer Service)
Tokico HP Series Front&Rear Shocks
Goodyear Wrangler Dura Trac 235/75-15 Tires
Pro Comp 52 Series 15x7 4.5" Backspacing Rims

Future Parts to be Order'd: (Next Few Months)
Yakima Megawarrior Roof Basket
Yakima Roof Basket Spare Tire Carrier
OEM Honda Skid Plate
OEM Honda Slim Window Visors
Honda Access/Optional Push Bar w/ PIAA Fogs
Clear Housing Head Lights (JDM/EDM/UKDM etc)
EDM 50/50 Tail Lights
+more

27Dec11'
Pick'n up of her CR-V from Previous Owner. My Daily Driver Soccer Dad Family Odyssey on the Left =]

Click the image to open in full size.

(Previous Owner Pictures below)

Click the image to open in full size.
Click the image to open in full size.

29Dec11'
Complete Top Hat Package (All Bushings&Bump Stops) Brand New from Honda Thanks to my Buddy Mike at O'Daniel Honda Omaha.

Click the image to open in full size.

2Dec11'
Her Pro Comp 52 Series Wheels came in. 15x7 4.5 Backspacing (Wrong Offset, needs to be atleast 0 Offset in order for this Style Rim to Clear the Brake Calipers)

Click the image to open in full size.

4Dec11'
EDM Front Bumper Purchased from a Friend at O'Daniel Honda Omaha. Had it on his Wife's CR-V for a couple Years used as a Daily Driver. 99'-00' Civic Si Fogs.

Click the image to open in full size.

5Dec11'
Goodyear Wrangler Duratrac 235/75-15 Tires came in. Definitely go'n Black Wall outside.

Click the image to open in full size.

13Dec11'
Rims&Tires Mount'd Thanks to my Friend Scott at O'Daniel Honda Omaha. No Hammer Clamp on Weights here =]

Click the image to open in full size.
Click the image to open in full size.

26Dec11'
Test Fit: Novus Tech 10MM Spacers Extra Set of New ARP Extended Studs i had lay'n around&Project Kics Gunmetal R26 Lug Nuts

Click the image to open in full size.
Click the image to open in full size.

31Dec11'
Test Fit: Single Wheel on her CR-V Today. Definitely miss Judge the Backspacing (Hits the Brake Caliper) but i'll get them to Work w/ some 15MM Spacers&Extened'd Studs, No Biggie. Vehicle is still at Factory Height. Rubbing doesn't seem bad, just need to do some Trimming&Grind down the Factory Weld Seem inside the Fender Well. (Was inform'd to just Fold over the Factory Pitch Weld instead of Grind'n down)

Specs:
10MM Novus Tech Rim Spacers from Canada
Goodyear Wangler DuraTrac 235-75/15
Pro Comp 52 Series 15x7 4 1/2 BackSpacing

Click the image to open in full size.
Click the image to open in full size.

3Jan12'
Templates for the Strut Spacers came in. They were Drop'd off w/ my Machinist as of 5Jan12' for Precision Billet Aluminum Products to be made.

Click the image to open in full size.
Click the image to open in full size.

6Jan12'
ARP Extend'd Studs came in, wasn't expecting them to be here till next week. Now it's the wait'n Game for the 15MM Rim Spacers then off to Buy Hub Bearings&install =]

Click the image to open in full size.

&onto why we would like to Lift her CR-V. Both of our Boys ride Dirt Bikes&we want'd a Vehicle that was Decent get'n through Semi Rough Terrain w/ Add'd Modifications (Lift+Wheels)&still was Reliable Easy to Maintain+Great on MPG.

Here's our Boys Honda CRF50's+i bought my Wife a CRF50 for her own for Christmas. My oldest Son has been Riding since he was 2. Pictures can be Found below, Click Link.
http://www.facebook.com/media/set/?s...5032740&type=3

Click the image to open in full size.
Click the image to open in full size.

Age 3 below
Click the image to open in full size.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-06-2012, 09:58 AM   #2
Honda-Tech Member
 
Join Date: Dec 2011
Posts: 8
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

sweet! havent seen a lifted crv before.
Johnk2340 is offline   Reply With Quote
Old 01-07-2012, 02:04 PM   #3
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Quote:
Originally Posted by Johnk2340 View Post
sweet! havent seen a lifted crv before.
Thanks, Her's should be the 1st one in our Area well that i know or of heard about.

This one has been Lift'd since 06' w/ No Problems. His User name on Hondasuv.com is OSX2000. Link below is his Build Site&Specs.
http://homepage.mac.com/OSX2000/CR-V/

Click the image to open in full size.

7Dec12'
Her Novus Tech 15MM Spacers came in Today, now it's Hub Bearing Time&install. Hopefully these will Clear her Front Brake Calipers this time around.

Click the image to open in full size.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-07-2012, 02:35 PM   #4
Honda-Tech Member
 
OneBadTurboCRV's Avatar
 
Join Date: Sep 2007
Location: IN Your Mind
Posts: 6,132
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Quote:
Originally Posted by Johnk2340 View Post
sweet! havent seen a lifted crv before.
Already a thread semi-dedicated to this. Starts up after the first couple pages or so...

CRV lift kit or bigger tires? off roadin
__________________
--- '13 Civic Si --- '98 CRV EX --- '95 Civic LX --- '91 Civic DX ---
OneBadTurboCRV is offline   Reply With Quote
Old 01-07-2012, 06:29 PM   #5
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Quote:
Originally Posted by N3va3vaSatisfi3d View Post
Already a thread semi-dedicated to this. Starts up after the first couple pages or so...

CRV lift kit or bigger tires? off roadin
Also these ones:

Official H-T Honda CR-V Thread
Official H-T CRV thread!

Lower'd Honda CR-V Thread
crv with civic coilovers

JDM/EDM items for 1st Gen Honda CR-V
JDM/EDM parts for 1st gen crv?
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-08-2012, 07:27 PM   #6
Honda-Tech Member
 
Join Date: Jul 2011
Posts: 32
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Looks good man!
gtiw is offline   Reply With Quote
Old 01-08-2012, 08:19 PM   #7
Honda-Tech Member
 
Join Date: Jan 2012
Location: malaysia
Posts: 6
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

intrested bout that Strut Spacers..do u make it ? can i have the dimension for it...?

thanks man...
sepoi2 is offline   Reply With Quote
Old 01-09-2012, 08:41 AM   #8
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Thank you.

Quote:
Originally Posted by sepoi2 View Post
intrested bout that Strut Spacers..do u make it ? can i have the dimension for it...?

thanks man...
There Currently at w/ my Machinist be'n made into Billet Aluminum Units as we Speak. Don't have any Dimensions but i'll get some when hes Finish'd. If i get enough interests, i'll Produced a couple extra Sets for Resale.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-09-2012, 12:12 PM   #9
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

9Jan12'
3 of 4 Hub Bearings. Final 1 will be here tomorrow then time for Extend'd Studs Rim Spacers&Bearings install on Wednesday.
Master Mind Daishi Stare Down. NGK R's are for my Son's Dirt Bike so No Uber Rare 2 Cylinder CR-V here ha

Click the image to open in full size.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-10-2012, 02:34 PM   #10
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Found 2 more Pictures on my Phone that i forgot about. Also Pick'd up the Final Hub Bearings, time for install tomorrow.

Click the image to open in full size.
Click the image to open in full size.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan

Last edited by 4NLINE UNLIMITED; 01-10-2012 at 03:47 PM. Reason: Fix'd Broken Picture Link
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-10-2012, 03:27 PM   #11
Honda-Tech Member
 
Join Date: Dec 2011
Posts: 5
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

nice!
k2086 is offline   Reply With Quote
Old 01-11-2012, 04:50 PM   #12
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Thanks.

11Jan12'
Fronts are all Done, New Hub Bearings ARP Extend'd Studs&Novus Tech 15MM Spacers. Rim/Brake Caliper Clearance issue has been Solved. :thumbsup: Rears would of been Done Tonight but one Bolt was really Stuck&ran out of Gas for the Torch. :thumbsdown:

Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-11-2012, 05:27 PM   #13
Honda-Tech Member
 
Join Date: Jan 2012
Location: malaysia
Posts: 6
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

nice..!!
sepoi2 is offline   Reply With Quote
Old 01-11-2012, 10:46 PM   #14
Honda-Tech Member
 
mike59's Avatar
 
Join Date: Dec 2009
Location: France
Posts: 63
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

mike59 is offline   Reply With Quote
Old 01-12-2012, 06:21 AM   #15
Honda-Tech Member
 
LDForget's Avatar
 
Join Date: Dec 2011
Location: Sudbury, Ontario, Canada
Posts: 1,345
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Looks good. What did the extended lugs cost you? How do the duralast bearings compare to oem? I want to change all of mine this summer if i can.
__________________
98 EK Hatch, built JDM GSR, Precision 5831,JE pistons, eagle rods, ect, ect, ect.
December 2012 Ride Of The Month My CRV Build Thread - deceased
LDForget is offline   Reply With Quote
Old 01-12-2012, 02:12 PM   #16
Honda-Tech Member
 
OneBadTurboCRV's Avatar
 
Join Date: Sep 2007
Location: IN Your Mind
Posts: 6,132
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Quote:
Originally Posted by LDForget View Post
Looks good. What did the extended lugs cost you? How do the duralast bearings compare to oem? I want to change all of mine this summer if i can.
100-7712 should be the ARP part number for those extended studs if I recall correctly. Around $20 a pack.

They are China garbage - get something better/closer to OEM specs.
__________________
--- '13 Civic Si --- '98 CRV EX --- '95 Civic LX --- '91 Civic DX ---
OneBadTurboCRV is offline   Reply With Quote
Old 01-12-2012, 02:22 PM   #17
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Quote:
Originally Posted by N3va3vaSatisfi3d View Post
100-7712 should be the ARP part number for those extended studs if I recall correctly. Around $20 a pack.

They are China garbage - get something better/closer to OEM specs.
Correct Part #, Received a Dealski on them for $70 Ship'd/20 Piece from StreetRays.com
Not sure what you mean by China made, ARP's are all made in House USA. There a lot Strong then Skunk2 which were Discontinued or Blox etc. Unless you meant Duralast is Garbage? Lifetime Warranty, buddy is a Store Manager for Autozone&hasn't have any Type of Complaints about them for the 10 Years he's been Employ'd w/ Autozone.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-12-2012, 03:53 PM   #18
Honda-Tech Member
 
OneBadTurboCRV's Avatar
 
Join Date: Sep 2007
Location: IN Your Mind
Posts: 6,132
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

I was talking about the Duralast bearings. They have failed me numerous times as well as the NTP (or whatever) Advance Auto Parts sells as well; many different platforms but the pre-assembled hubs seem to be the worst. A lot of them have dead spots rigjt out of the box. Sad, so for me it's suppliers like Timken, BCA National, OEM, ect... To each their own.
__________________
--- '13 Civic Si --- '98 CRV EX --- '95 Civic LX --- '91 Civic DX ---
OneBadTurboCRV is offline   Reply With Quote
Old 01-12-2012, 08:00 PM   #19
Honda-Tech Member
 
LDForget's Avatar
 
Join Date: Dec 2011
Location: Sudbury, Ontario, Canada
Posts: 1,345
iTrader Rating: (0)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Well, thats why i was asking. I used to work at the parts counter at Part Source here in canada, and we never carried it. We mostly sold national bearings. Ill probably just get oem.
__________________
98 EK Hatch, built JDM GSR, Precision 5831,JE pistons, eagle rods, ect, ect, ect.
December 2012 Ride Of The Month My CRV Build Thread - deceased
LDForget is offline   Reply With Quote
Old 01-15-2012, 07:45 PM   #20
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Thanks Guys. I'll be go'n OEM Honda Bearings once her New Engine/Drive-train Platform is Done along w/ Driveshaft Shop Hubs maybe even 36MM Axles up Front but still debating. Have an extra New Gater Axle lay'n around just need to order a New one to have a Complete Pair.

15Jan12'
New Strut Spacers are Finally Done. A couple Coats then Time for install =] Billet Aluminum Product weren't Cost Effective so we opt for Steel. Once the Ironman Lift Coilovers are order'd i'll have some 1.5" Strut Spacers made then Powder Coat'd. These ones will just be Spray Can a couple Coats then install'd. Hoping to have these install'd tomorrow along w/ her Tires. New on the Right vs Old on the Left. Great Craftsmanship.


Click the image to open in full size.
Click the image to open in full size.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-16-2012, 12:26 AM   #21
Honda-Tech Member
 
Join Date: Sep 2008
Posts: 562
iTrader Rating: (3)
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

how much for strut spacers?
slowesteg is offline   Reply With Quote
Old 01-16-2012, 12:36 AM   #22
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Quote:
Originally Posted by slowesteg View Post
how much for strut spacers?
Not Forsale&don't think my Machinist will put them into Production either. To much Labor Time into this in order to Continue a Turn around Rate. They are pretty Simple to make.

Go to Camel4x4.com they have some Ironman Lift Coil Springs you can Buy which are Cheaper then this Spacers. I'm just Experimenting for now but i'll be order'n a Set of Ironman Coils+1.5" Strut Spacers Combo.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-17-2012, 04:23 PM   #23
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

17Jan12'
Buddy Logan Do'n WORK. Temperary Rear Strut Spacers install'd.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
Old 01-18-2012, 05:20 AM   #24
Honda-Tech Member
 
jlk16188's Avatar
 
Join Date: Jan 2008
Location: PA
Posts: 623
iTrader Rating: (0)
Send a message via AIM to jlk16188
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

is it just me or does your strut have a bow like a banana in it now?
jlk16188 is offline   Reply With Quote
Old 01-18-2012, 06:03 AM   #25
Honda-Tech Member
 
4NLINE UNLIMITED's Avatar
 
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,308
iTrader Rating: (3)
BricknerFTW calebkayden
Default Re: Wife's 1st Gen CR-V Build, Work in Progress/DD. Omaha NE.

Quote:
Originally Posted by jlk16188 View Post
is it just me or does your strut have a bow like a banana in it now?
This was just a Mock up. As you can see in the Photo the Coil Spring is Touch'n the Trail'n arm which is why it looks like the Whole Assembly is Bowed. He Cut a Small Notch into the Trail'n Arm&everything is Level again. Once there's actual Pressure/Weight on the Suspension it won't even be Close. I has some New Tokico HP Shocks for Replacement once the Ironman Lift Coils come in as for these Large Strut Spacers are just Temporary use for now.
__________________
Facebook.com/BricknerFTW | Instagram.com/BricknerFTW | Car Fiend App BricknerFTW
RIP Jon Tanji and Randy Gagan
4NLINE UNLIMITED is offline   Reply With Quote
 
 
 
submit to reddit
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hi!! ek4 ferio!! crazy26 Honda / Acura 27 09-13-2012 07:44 PM
..::ViNZx_xD FD2's Official Track/Show car Build Thread...Work in Progress::.. ViNZx_xD Honda Civic (2006 - Current) 13 02-19-2012 10:48 PM
My Edm CRX VTEC ee8 Build **TONS OF PICS** tonyjdm Appearance Build Threads 11 01-30-2012 11:55 AM
The Blues Meeting Dellgary Acura TSX 3 08-28-2011 11:39 AM
Mr Civic's EF Mr C1vic Honda CRX / EF Civic (1988-1991) 20 07-06-2011 05:42 AM


Tags
2000, coil, crv, daily, florida, gen, honda, jdm, news, northwest, odyssey, powered, spacer, spacers, spring, vbulletin

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:18 AM.



2014 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Emails & Contact Details