Struts/Ball Joints
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2012
Location: Massachusetts
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Struts/Ball Joints
02 CRV EX. I am going to replace all four struts as well as the front lower ball joints. I think I have a good handle on doing it myself. All things being equal should I go with Monroe, KYB, or Gabriel struts? Should I also do the lower control arm bushings while I have it all apart? What size is the front axle nut? I have seen three different sizes while shopping for parts.
#2
Honda-Tech Member
Thread Starter
Join Date: Nov 2012
Location: Massachusetts
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: Struts/Ball Joints
I was thinking of pressing the ball joints into the knuckles with one of those rented c clamp type from the auto parts store. I did see a couple of cheap presses at Harbor Freight Tools. One of them was a 20 ton and the other one was a 12 ton. Is the 12 ton press enough to do the ball joints and any other bushings that I might have to press or shoud I step it up to the 20 ton model?
Thread
Thread Starter
Forum
Replies
Last Post