Official H-T CRV thread!
#2703
Re: Official H-T CRV thread!
My v on its way down to Florida from Rd island. It's a 99 rt4wd automatic. Has **** ton of miles but I'm going to replace the head and all other gaskets if I have to do the block then I'll cross that bridge when I get there. Fist mod after the essentials will be lowering with accord sleeves then I'll be looking for some rsx or civil si stocks.
#2705
Re: Official H-T CRV thread!
Bad idea to use other than vehicle specific... I did that before they started making kits for the crv, did damage. Go with either the k sport or d2 actual coilovers offered for the crv... You'll prolly regret it otherwise.
#2706
Re: Official H-T CRV thread!
What damage could be caused? As long as the spring rates are close as well as length should be no different. Besides its a lot easier to find used accord parts than used V parts.
Berz out.
Berz out.
#2712
Re: Official H-T CRV thread!
Big bergz, i guess i should've specified... Damage to struts not so much to vehicle itself.. And possibly tires if they get cut by slamming down too hard and getting stuck
#2716
derp resistant
Join Date: Dec 1969
Location: Through the fire and the flames
Posts: 1,392
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official H-T CRV thread!
sup my dudes. just bought a '00 5spd and i am enjoying it so far. it needs new wheel bearings and a new sunroof glass but other than that, its in pretty good condition. my plans for it are a 3" lift, some sweet *** bfg a/t tires, some low offset steel wheels, etc etc.
Attachment 519188
Attachment 519188
#2718
derp resistant
Join Date: Dec 1969
Location: Through the fire and the flames
Posts: 1,392
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official H-T CRV thread!
just under 150,000, but it seems like its been pretty thrashed. its funny about hondas. you either have dipshits that mod them to hell and they fall apart eventually because the mods were incorrectly done or parts used on the car were bargain knock off parts, or you get cars like the cr-v which arent modified at all but are still in bad shape because original owners tend to neglect them and use them as a point a to point b vehicle. its like people either have too much pride in their cars or not enough.
#2720
Re: Official H-T CRV thread!
So Folks, I haven't spent much time on this forum since the recent movement towards facebook groups! as many of you know my CR-V from the Facebook group, this wont be news to you, but for those that are die hard forum guys, I have decided to post some updated pictures of my CR-V. I have sourced a few rare OEM bits since my last post, took it off-road and covered it in mud, cleaned and showed it a few times.
#2722
Re: Official H-T CRV thread!
Can someone with OEM side bars please take a pic of how the are mounted and post it up for me please? Oh and if you could also take them off and sell them to me that would be great. haha
I saw a V driving down the street and when they pulled over I asked the girl if she wanted to sell her set. She declined. Her V was trashed. Some people have no idea what they have. It even had the back bars too. Damn it.
Berz out.
I saw a V driving down the street and when they pulled over I asked the girl if she wanted to sell her set. She declined. Her V was trashed. Some people have no idea what they have. It even had the back bars too. Damn it.
Berz out.
#2723
Re: Official H-T CRV thread!
Can someone with OEM side bars please take a pic of how the are mounted and post it up for me please? Oh and if you could also take them off and sell them to me that would be great. haha
I saw a V driving down the street and when they pulled over I asked the girl if she wanted to sell her set. She declined. Her V was trashed. Some people have no idea what they have. It even had the back bars too. Damn it.
Berz out.
I saw a V driving down the street and when they pulled over I asked the girl if she wanted to sell her set. She declined. Her V was trashed. Some people have no idea what they have. It even had the back bars too. Damn it.
Berz out.
#2725
Re: Official H-T CRV thread!
Anyone know what our A pillar matches up with the closest? I wanna buy a gauge pod and I'm doubting they make a CRV specific one. The dash looks a lot like my EK so will that EK bezel also fit http://www.velocityshop.com/images/p...-bezel-ek.jpg?
Berz out.
Berz out.