Skillachie

Pics of the lift

ARMED

done, just need new tires, i might need to lift the front a bit more...about an inch

ARMED

so its started



so the front was a little low..


not a little high! wtf
i think this is the highest the coilover would go...



finally done...kinda dark ill take better picture after i get my new tires...right now im using 225 55 17

i will be using 225 70 16

ARMED

ARMED

oh yeah i didnt use spacers/lifters...
i used my coilovers.. them ***** could go high... i have like 2-3 more inches to go in the front...you could see one of the pictures when i went high in the front

the rear could go higher...the higher you get the harder it is to line up all the bolts in the rear...front was sooo easy...

ARMED

i had to turn my spc ball joints the other way for the front...

JoshTheJerk

sweeeeeeeeeet!!!

ARMED

ARMED

**** i wonder if 225 70 16 would fit/rub

Skillachie

Looks Sweet, this is what i'd like to do as well, slammed for the summer and lifted for winter, And the good thing is it can be done with the coilovers

ARMED

yeah i could go higher but the wife didnt like it...

ARMED

ok, so im thinking about going 15 inch wheels...

do i need to get a lower offset to use 235 75 15?
15x8 offset???? spacers?

tony_2018

Damn, how's your axles looking?

qwrty

i saw cragar soft 8, the offset im getting is +6 offset is the one im getting.. so its not that sticking
out too much, ive seen 0 offset and negative ones and theyre having issues w/ rubbing in front,
good luck!

mr_bluedevil_2

Lifted is definitely the way to go. I was slammed for 4 years and after buying 4 sets of struts (including 2 sets of teins) i said to hell with it. When my trial period is over I'll post some pictures. I'm running 2" lift and 235/65r17's with minor rubbing... I had to shave a little plastic and persuade some pinch welds but all is good now

Skillachie

I wouldnt go higher than where you're at either

mr_bluedevil_2

What he said^^^^^ anything over 3.5 inches, things start to bind

ARMED

skillachie... yeah im not going any higher

mr blue devil ,,,let me see some pics and what are the offset of the wheel you used
I had mine dropped since 2008 lol....im done...

qwrty... you should see my fog lamps LOL

ARMED

15" rims 5x4.5
will i need spacer for this??? will this clear my calipers?

mr_bluedevil_2

I'm still a trial user right now but I'll post plenty of pictures when i can. The stock ridgeline wheels are 17x7.5 +48 (i think) i had to run a 1.25" hub spacer/converter from 5x114 to 5x120. I've never been a fan of running hub spacers for fear of more damage buuuuuuut i like how factory wheels look and those were the widest Honda offers soooooo that's what i ended up with. I picked up the wheels for $150 and only one has a little curb rash. Eventually I'll powdercoat them a gunmetal color or something.

mr_bluedevil_2

If you have an Instagram my name is the same name as this one... I have a few pictures of it up there right now. I'm going to be plastidipping it this week so it'll all be one color again after the accident. If your wheel is a 5x4.5 you'll need to get the converter hub

ARMED

no instagram lol

noname87

no pictures of the quad fog setup? or waiting until they're complete before posting?

ARMED

lol not wired yet been working on my wheel set up, i actually used my old 16x7 wheels and 215 70 16 General Grabber AT2...with .25 spacers.....

i want to lift it up a little higher...ugh...i want to use a 225 70 16 BF goodrich ko A/T..
but i settles with Generals...same thread pattern..

pics soon

BigBerz

I just posted pics in the other thread of my 15x8 with 4.5" backspace. I have 205/70 rubber (oem) and it will for sure rub in the rear with any kind of articulation. The front don't rub anywhere when turning but will with articulation.

Berz out.