crank sensor on my CR-V
07-19-2013, 05:52 PM
#2
Trial User
Thread Starter
Join Date: Jul 2013
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Re: crank sensor on my CR-V
It's a '98 with a 2.0 liter engine, if that is important.
Also on a '98 CR-V, what are the common problems with a distributor ignition module that does not have a coil pack?
Also on a '98 CR-V, what are the common problems with a distributor ignition module that does not have a coil pack?
07-19-2013, 07:50 PM
#3
Honda-Tech Member
Join Date: Aug 2005
Location: san antonio, tx, usa
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Re: crank sensor on my CR-V
The sensor can be bypassed.. Look up "obd-1 swap in an ek"... If you go in the civic FAQ page here on Honda tech and then go to i believe "swap wiring" and go to ckf bypass. It will show you exactly how to do it.. It requires two wire splices at the ecu.
07-19-2013, 07:51 PM
#4
Honda-Tech Member
Join Date: Aug 2005
Location: san antonio, tx, usa
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
07-22-2013, 10:07 AM
#6
Honda-Tech Member
Join Date: Jul 2005
Location: Louisville, Kentucky
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
Re: crank sensor on my CR-V
ckf trick saccord posted worked on my crv. I put a JDM B20 in it and JDM engines don't have the ckf sensor.
Now my only problem is a damn code for the damn evap system and a random cyl 1 missfire that happens like once every 2 weeks.
Now my only problem is a damn code for the damn evap system and a random cyl 1 missfire that happens like once every 2 weeks.
07-22-2013, 09:35 PM
#7
Trial User
Thread Starter
Join Date: Jul 2013
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
07-28-2013, 01:53 AM
#8
Honda-Tech Member
Join Date: Oct 2008
Location: Lincoln, WTF, USA
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: crank sensor on my CR-V
A lot of the JDM motors don't have EVAP systems since they don't smog like the US.
Your best bet especially if you have a manual is to use a JDM ECU or best yet just convert to obd1 chipped.
Your best bet especially if you have a manual is to use a JDM ECU or best yet just convert to obd1 chipped.
SRe: crank sensor on my CR-V
Thread
Thread Starter
Forum
Replies
Last Post
hondaclown
Honda Civic / Del Sol (1992 - 2000)
9
07-17-2023 08:14 AM
mikester1222
Honda CRX / EF Civic (1988 - 1991)
1
05-07-2009 09:35 PM
