swordofdoom

Anybody. now what energy suspension trailer arm bushing works for a 98 crv? Mines shot and I'm looking for something that won't require too much work down the road again.

gxr154

wondering if mine were worn out too....does your crv hit hard in the rear when you hit a bump and feel like it swerves the rear???...

qwrty

i use this FTW!



http://www.ebay.com/itm/Whiteline-Rear-Trailing-Arm-Bushings-Pivot-Position-Honda-CRV-2WD-1997-4WD-2-/140857491158?pt=Motors_Car_Truck_Parts_Accessories&hash=item20cbc2bed6&vxp=mtr
do it once, do it right!!
good luck!

civiceg94

I used civic si from energy suspension

swordofdoom

Yeah if there is even a tiny bump u can hear the rear rattle. I looked underneath and both arms were ripped at the top and bottom where the metal bar sits. I just replaced the whole front bushing set so now the noise is clear on where its coming from. The front was way worse with a metal to metal sound.

boliviansol

I replaced mine with oem figured if they made it this long they should last me another 13 years

fitseries3

+1

way better than OEM replacement. a little stiffer but thats not a bad thing

all 88-00 civic/integra energy suspension RTA bushings are all same and will work in crv just fine.

swordofdoom

I bought some energy suspension today since the 88-2000 civic trailing arm bushings will work. These are the ones where you re-use the old sleeve and the metal bar inside.

shermanyang

iTrader: (1)

I'm going to try the old silicone filling trick on some new bushings....