01 crv 5 speed project for 2013(((boosted))))
01-12-2013, 09:12 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
---Crv boosted project continued!!!! ----
I have been driving integras. civics and crxs though out my younger years and finally got tired of driving lowered cars.... When my 00 integra 4 door (daily car) got stolen, I knew its time to get something different , something that doesn't stand out that much . .. ; p
01 crv lx
5speed
leather seats
addco sway bars
hr lowering spings
pioneer avicz2
These are the parts the will be put on this month...
inlinepro ac manifold
gt3071r turbo
400hp intercooler
id1000s
competition clutch stage4
act 9 lb flywheel
si cluster
koni yellows
Motor:
stock gsr head
skunk intake manifold
b20 block (stock sleeves)
cp 9.7 cr
eagle rods
acl race bearings
type r oil pump
350-380 hp goal on pump gas.....(enough power to **** off stock evos and sti)
2013 proj.... 01 boosted 5 sp crv proj
2010-2012 proj..... integra is almost done!!!!!!
01 crv lx
5speed
leather seats
addco sway bars
hr lowering spings
pioneer avicz2
These are the parts the will be put on this month...
inlinepro ac manifold
gt3071r turbo
400hp intercooler
id1000s
competition clutch stage4
act 9 lb flywheel
si cluster
koni yellows
Motor:
stock gsr head
skunk intake manifold
b20 block (stock sleeves)
cp 9.7 cr
eagle rods
acl race bearings
type r oil pump
350-380 hp goal on pump gas.....(enough power to **** off stock evos and sti)
2013 proj.... 01 boosted 5 sp crv proj
2010-2012 proj..... integra is almost done!!!!!!
Last edited by 11SECEG; 04-01-2015 at 02:51 PM. Reason: ..
01-13-2013, 06:20 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: 01 crv 5 speed project for 2013(((boosted))))
I am using vtec waterpump & timing belt... I always buy new oil pump on any motors I build for myself or for other people...
01-13-2013, 09:57 AM
#4
Honda-Tech Member
Join Date: Jan 2013
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Re: 01 crv 5 speed project for 2013(((boosted))))
NICE V!
how much was the set-up may I ask and from where? how low are you and how does it ride? I like Koni (at least for my CRX) I don't want to go LOW I just want to close a little gap once I get a set of rims...thinking te37 replicas or enkie rpf1 in 16s or 17s not sure yet dont want heavy rims and bad mileage..BUT DO post more pictures of the V with those rims please! I'm trying to decided on rims would help to actually know how it looks and since you got a set better visual
LOL lmk
BTW also what size is that? rim&tires thanks!
how much was the set-up may I ask and from where? how low are you and how does it ride? I like Koni (at least for my CRX) I don't want to go LOW I just want to close a little gap once I get a set of rims...thinking te37 replicas or enkie rpf1 in 16s or 17s not sure yet dont want heavy rims and bad mileage..BUT DO post more pictures of the V with those rims please! I'm trying to decided on rims would help to actually know how it looks and since you got a set better visual
LOL lmkBTW also what size is that? rim&tires thanks!
01-13-2013, 06:06 PM
#6
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: 01 crv 5 speed project for 2013(((boosted))))
Thanks man!!
Rims are 17x8 and tires are 225-50-17
I dont have the koni shocks yet but I was quoted 420 for all 4 ... My friend gets discount on them.... I like my h&r springs ... They ride smooth....
Rims are 17x8 and tires are 225-50-17
I dont have the koni shocks yet but I was quoted 420 for all 4 ... My friend gets discount on them.... I like my h&r springs ... They ride smooth....
01-13-2013, 06:23 PM
#7
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
01-13-2013, 07:55 PM
#9
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
01-14-2013, 08:51 PM
#12
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: 01 crv 5 speed project for 2013(((boosted))))
more stuff came in today.......
I got the head back from the machineshop for resurface and full valve job...
Block was lightly honed and decked .....I cant wait to start assembling the motor!!
I got the head back from the machineshop for resurface and full valve job...
Block was lightly honed and decked .....I cant wait to start assembling the motor!!
01-15-2013, 09:40 AM
#14
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
01-15-2013, 01:48 PM
#17
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: 01 crv 5 speed project for 2013(((boosted))))
Anyone know who makes bigger sway bars for crv... I have addco sway bars now.... Anyone running whiteline?
01-15-2013, 03:05 PM
#18
Honda-Tech Member
01-15-2013, 08:00 PM
#19
Honda-Tech Member
Join Date: Jan 2013
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Re: 01 crv 5 speed project for 2013(((boosted))))
ordered myself an ADDCO sway bar to upgraded the little oem one but canceled it due to hearing that some peeps have fitment issues and the bushing so I didn't want to deal with that...thinking about ordering me the "ultra racing"? one though it's only 16mm and not 19mm like the ADDCO one
...or if I can find something else, haven't heard the whiteline I'll check it out too =P....BTW you got 17x8 rims I'm thinking of getting some 17x8 any rubbing issues or anything? what's the offset on yours? The set I'm look for is posted on my thread but I'm thinking to go for a set of 17x8 with +38 and hub size 73 you know if I'll have any problems/troubles with that size/offset?? I'll be stock height maybe just a lower spring for closing of gap slightly IF any...not going low or auto-x or anything here just regular DD wanting some nice shoes for the V
01-15-2013, 09:00 PM
#20
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: 01 crv 5 speed project for 2013(((boosted))))
ordered myself an ADDCO sway bar to upgraded the little oem one but canceled it due to hearing that some peeps have fitment issues and the bushing so I didn't want to deal with that...thinking about ordering me the "ultra racing"? one though it's only 16mm and not 19mm like the ADDCO one...or if I can find something else, haven't heard the whiteline I'll check it out too =P....
BTW you got 17x8 rims I'm thinking of getting some 17x8 any rubbing issues or anything? what's the offset on yours? The set I'm look for is posted on my thread but I'm thinking to go for a set of 17x8 with +38 and hub size 73 you know if I'll have any problems/troubles with that size/offset?? I'll be stock height maybe just a lower spring for closing of gap slightly IF any...not going low or auto-x or anything here just regular DD wanting some nice shoes for the V
...or if I can find something else, haven't heard the whiteline I'll check it out too =P....BTW you got 17x8 rims I'm thinking of getting some 17x8 any rubbing issues or anything? what's the offset on yours? The set I'm look for is posted on my thread but I'm thinking to go for a set of 17x8 with +38 and hub size 73 you know if I'll have any problems/troubles with that size/offset?? I'll be stock height maybe just a lower spring for closing of gap slightly IF any...not going low or auto-x or anything here just regular DD wanting some nice shoes for the V
01-15-2013, 09:22 PM
#21
Honda-Tech Member
Join Date: Jan 2013
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Re: 01 crv 5 speed project for 2013(((boosted))))
enkie rpf1 isn't that what you have? I was thinking the rpf1 too but like more the volk te37 look but volk will break the bank account so gotta go with Rota or something else cheaper
besided just my DD =P
or something else cheaper besided just my DD =P
01-16-2013, 10:51 AM
#22
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: 01 crv 5 speed project for 2013(((boosted))))
No mine are not enkie rpf1s.. I wish .. These are motegi rims I got from a friend of mine... I have all 5 rims... I think 18s will look better ....
01-16-2013, 10:52 AM
#23
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
01-16-2013, 11:52 AM
#24
Re: 01 crv 5 speed project for 2013(((boosted))))
ordered myself an ADDCO sway bar to upgraded the little oem one but canceled it due to hearing that some peeps have fitment issues and the bushing so I didn't want to deal with that...thinking about ordering me the "ultra racing"? one though it's only 16mm and not 19mm like the ADDCO one...or if I can find something else, haven't heard the whiteline I'll check it out too =P....
BTW you got 17x8 rims I'm thinking of getting some 17x8 any rubbing issues or anything? what's the offset on yours? The set I'm look for is posted on my thread but I'm thinking to go for a set of 17x8 with +38 and hub size 73 you know if I'll have any problems/troubles with that size/offset?? I'll be stock height maybe just a lower spring for closing of gap slightly IF any...not going low or auto-x or anything here just regular DD wanting some nice shoes for the V
...or if I can find something else, haven't heard the whiteline I'll check it out too =P....BTW you got 17x8 rims I'm thinking of getting some 17x8 any rubbing issues or anything? what's the offset on yours? The set I'm look for is posted on my thread but I'm thinking to go for a set of 17x8 with +38 and hub size 73 you know if I'll have any problems/troubles with that size/offset?? I'll be stock height maybe just a lower spring for closing of gap slightly IF any...not going low or auto-x or anything here just regular DD wanting some nice shoes for the V
01-17-2013, 08:44 AM
#25
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: BAY AREA, CA, US
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: 01 crv 5 speed project for 2013(((boosted))))
I have 18x8 38 offset w/ 225/45/18 and they don't rub but I'm not dropped...yet. Also with the Addco sway bar, if you run into fitment issues all you have to do is get RSX bushings from an Acura dealer or you can get OEM bushings and use a dremo and grind out some of the innards and reuse the old brackets. That's what I had to do to mine and my buddy's CRVs. Oh...and the size of the wheel hub shouldn't matter if it's too big, if it's too small then it becomes a problem.
Last edited by 11SECEG; 01-31-2013 at 02:51 PM.
